Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851

Hydraulic system

Rotary group

Rotary group for the common construction-machinery hydraulic pump series.

Rotary group
Chi tiết · PartRotary group

Quick answer

Rotary group: what is it?

The hydraulic rotary group is the complete rotating assembly inside a piston pump — cylinder block, pistons, shoe plate, swash plate, valve plate, drive shaft and often the regulator — sold as one matched set. When several parts are worn together, fitting a whole rotary group by pump code is faster and more reliable than piecing it together part by part.

  • Authorized JIC Hydraulics distributor
  • Nationwide delivery · HCMC warehouse
  • Wholesale and retail
  • Fitment confirmed before we quote

The rotary group is the heart of a piston pump: every rotating, close-fitted part lives in this assembly, wears together and mates in pairs. So once a pump is weak, hot and dropping metal, choosing between rebuilding part by part and fitting a whole rotary group comes down to how far the wear has gone — one bad part means a single replacement, but when the cylinder block, valve plate and shoes are all tired, a pre-matched set seals better and lasts longer.

A rotary group set includes

  • Cylinder block and the piston-and-shoe set
  • Shoe plate to hold the shoes, swash plate to set stroke
  • Valve plate that splits intake and discharge
  • Drive shaft, support bearings and seals
  • Regulator (depending on pump family and request)

As JIC's authorized distributor, Việt Trung Hải supplies rotary groups matched to K3V, K5V, A8VO, A10V and HPV pump codes, genuine parts, wholesale and retail, delivered nationwide.

Hydraulic pump rotary group

Anatomy

Rotary group inside the rotary group

The parts inside a piston pump work together to build flow and pressure. Tap any part to explore it and look it up.

  1. Rotary group
  2. Cylinder block
  3. Piston
  4. Shoe plate
  5. Swash plate
  6. Valve plate
  7. Drive shaft
  8. Ball guide & port plate
  9. Regulator

Wear signs

When to replace the rotary group

  • Weak, hot and noisy pump
  • Metal particles in the oil
  • Pressure drop when hot
  • Time to weigh a rebuild vs. a full replacement

Compatibility

Pump series we supply rotary group for

Pump / motor seriesMakerProducts
HPVKomatsu21 products
K3VKawasaki14 products
A8VOUchida/Rexroth10 products
A10VUchida/Rexroth9 products
PSVKayaba (KYB)9 products
M2XKawasaki8 products
K5VKawasaki6 products
DNBKawasaki3 products
K3SPKawasaki2 products
K7VKawasaki2 products
MSFKayaba (KYB)2 products

Send the pump code or machine model and we'll confirm the exact fit before quoting.

More Rotary group codes (123)

Technical handbook

Related guides

Find it

Order the exact part

Pick whichever suits you — our team confirms fitment, then quotes.

  1. By part number

    Send the number stamped on the old part for the exact match.

  2. By machine model

    e.g. Komatsu PC200-8, Hitachi ZX200 — send the model to match.

  3. By pump / motor series

    e.g. K3V112, A8VO107 — when you know the pump code.

Request a quote

FAQ

Frequently asked questions

When should the whole rotary group be replaced instead of individual parts?

When several parts are worn together — block, valve plate, shoes, swash plate — a pre-matched rotary group seals better and lasts longer than repeated fitting. If only one part has failed and the rest is sound, a single replacement makes more sense.

What is included in a rotary group set?

Typically the cylinder block, the piston-and-shoe set, shoe plate, swash plate, valve plate and drive shaft with bearings and seals; some pump families include the regulator. Contents vary, so confirm when ordering.

Why must a rotary group match the pump code?

Because piston count, bore size, swash angle and spline type differ between families and pump versions; a mismatch won't seal or won't drive. Send the pump code or a photo of the nameplate so the correct set is matched.

If a pump runs hot with metal in the oil, can the rotary group still be saved?

It depends on the damage: fine debris and shallow scoring may allow lapping and a few new parts. But with heavy debris and deep pitting on the valve plate and block, replace the rotary group and flush the system to avoid a repeat failure.

Get a quote

Need the right part, fast?

Send your machine model and the part you need — we confirm fitment and quote.

  • Pump code / plate
  • Machine model
  • Photo of the old part