Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Spring – Kawasaki K3V180DT

Kawasaki · K3V

Spring – Kawasaki K3V180DT

New, correct codeOn requestK3V180DT

Quick answer

The Kawasaki K3V180DT spring is the elastic part inside the piston-pump rotary group, pressing the cylinder block onto the valve plate to keep a tight seal at startup. The K3V180 main pump powers ~35–45 ton excavators such as Kobelco SK350 and Hyundai R360.

Việt Trung Hải supplies correct-code K3V180DT springs with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Kawasaki · K3V
Model code
K3V180DT
SKU
2021-590-1-124
Condition
New, correct code
Availability
On request

Kawasaki K3V180DT pump spring — machine fit

The spring works inside the K3V180DT rotary group — the rotating cylinder block, pistons, valve plate and shaft. The centre spring presses the block onto the valve plate and preloads the piston retainer against the swash plate, holding a tight seal at startup and low pressure. The K3V180 series is the main pump on ~35–45 ton excavators such as Kobelco SK350, Hyundai R360 and Doosan DH370.

When to replace

A weak spring lets the block lift: slow pressure build, sluggish startup, knocking or vibration, and rising leakage. A fatigued or broken spring sheds debris that scores the valve plate.

Choose genuine-quality

A good spring keeps its free length and load over long service; a poor one takes a set and fails. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies K3V180DT springs in proper spring steel, correctly heat-treated and wound to the original dimensions, so they seat in the standard block with no fitting work. Contact us for a fast quote.

Frequently asked questions

Which excavators use the K3V180DT spring?

It is the spring inside the Kawasaki K3V180DT main pump, fitted to ~35–45 ton excavators such as Kobelco SK350, Hyundai R360 and Doosan DH370. Send your machine model and pump code so Việt Trung Hải can confirm the exact part before quoting.

How do I know the pump spring is weak?

A weak spring shows as slow pressure build, sluggish startup, knocking or vibration in the pump, and rising internal leakage. If the spring looks fatigued or broken or you find metal debris, replace it along with the affected rotary-group parts.

Does a JIC K3V180DT spring need any adjusting to fit the standard block?

No. Việt Trung Hải is an authorized JIC Hydraulics distributor; the JIC K3V180DT spring is wound from proper spring steel, heat-treated correctly and held to the original free length, so it drops into the block at full preload. Genuine springs are available too, and we quote quickly.

Get a quote

Request a quote: Spring – Kawasaki K3V180DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides