Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851

Hydraulic system

Swash plate

Swash plate for the common construction-machinery hydraulic pump series.

Swash plate
Chi tiết · PartSwash plate

Quick answer

Swash plate: what is it?

The swash plate is the fixed angled plate that the piston shoes slide across; its tilt angle sets how far each piston strokes, which is the pump's displacement. A scored or pitted swash plate makes the shoes drag, so the pump goes weak, loses flow, and the controls drift or hunt.

  • Authorized JIC Hydraulics distributor
  • Nationwide delivery · HCMC warehouse
  • Wholesale and retail
  • Fitment confirmed before we quote

The swash plate is the part that sets a piston pump's flow: the shoes bear and slide on its angled face, and the greater the tilt, the longer each piston strokes and the more oil the pump moves. On a variable pump the regulator swings the swash plate back and forth to change flow with load, so its face carries heavy load while the sliding direction reverses constantly.

How a bad swash plate shows up

  • Weak pump and lost flow even with healthy control pressure
  • Controls that drift, won't hold a load, and hunt
  • Length-wise scoring, pitting or a worn groove tracking the shoes
  • Squeal and a local hot spot where the shoes contact
  • Bronze shed from the shoes smeared on the face and in the oil

Because the shoes and swash plate wear as a pair, replacing the swash plate usually means renewing the shoes and shoe plate too. Việt Trung Hải supplies swash plates at the correct angle for K3V, A8VO and HPV pumps, genuine parts, with rotary-group matching.

Hydraulic pump rotary group

Anatomy

Swash plate inside the rotary group

The parts inside a piston pump work together to build flow and pressure. Tap any part to explore it and look it up.

  1. Rotary group
  2. Cylinder block
  3. Piston
  4. Shoe plate
  5. Swash plate
  6. Valve plate
  7. Drive shaft
  8. Ball guide & port plate
  9. Regulator

Wear signs

When to replace the swash plate

  • Weak pump, loss of flow
  • Scoring on the tilted swash face
  • Controls drift, won't hold load
  • Piston shoes wear quickly

Compatibility

Pump series we supply swash plate for

Pump / motor seriesMakerProducts
HPVKomatsu8 products
K3VKawasaki5 products
K5VKawasaki4 products
A10VUchida/Rexroth2 products
DNBKawasaki1 product
K3SPKawasaki1 product
K7VKawasaki1 product
MAGKayaba (KYB)1 product
MSFKayaba (KYB)1 product
PSVKayaba (KYB)1 product

Send the pump code or machine model and we'll confirm the exact fit before quoting.

Find it

Order the exact part

Pick whichever suits you — our team confirms fitment, then quotes.

  1. By part number

    Send the number stamped on the old part for the exact match.

  2. By machine model

    e.g. Komatsu PC200-8, Hitachi ZX200 — send the model to match.

  3. By pump / motor series

    e.g. K3V112, A8VO107 — when you know the pump code.

Request a quote

FAQ

Frequently asked questions

What does the swash plate determine in the pump?

Its tilt angle sets the piston stroke, and therefore the pump's flow — more tilt moves more oil. On a variable pump, the regulator changes exactly this angle to control flow.

Are the swash plate and shoe plate the same thing?

No. The swash plate is the tilted plate the shoes slide on and it sets flow; the shoe plate is the retainer that holds the shoes against it. One creates stroke, the other just holds the shoes.

Why does a worn swash plate make the controls drift?

A pitted face makes the shoes slide unevenly so the pump can't hold steady flow, letting the load sag and the controls hunt. It usually comes with a weak pump and heat at the shoe contact area.

Do the shoes and shoe plate need replacing with the swash plate?

It's best to renew them together. The shoes have bedded into the old plate, so on a new face they contact unevenly and wear fast. Replacing shoes, shoe plate and swash plate as a set keeps the group smooth and durable.

Get a quote

Need the right part, fast?

Send your machine model and the part you need — we confirm fitment and quote.

  • Pump code / plate
  • Machine model
  • Photo of the old part