Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851

Hydraulic system

Hydraulic valve

Complete hydraulic valve and replacement parts for construction machinery.

Hydraulic valve
Chi tiết · PartHydraulic valve

Quick answer

Hydraulic valve: what is it?

A hydraulic valve, the main control valve, is where oil from the main pump is split and metered to the cylinders and motors by the lever signals. When it wears or sticks, functions turn slow and jerky, levers drift under load, or internal leak lets a cylinder settle on its own. Việt Trung Hải supplies genuine and high-quality replacement hydraulic valves, matched to the valve-body code and machine model.

  • Authorized JIC Hydraulics distributor
  • Nationwide delivery · HCMC warehouse
  • Wholesale and retail
  • Fitment confirmed before we quote

A hydraulic valve, the main control valve, is where oil from the main pump is split and metered to the cylinders and motors according to the lever signals. When it wears or sticks, you get slow or jerky functions, levers that drift under heavy load, or internal leak that lets a cylinder settle on its own. The valve is a precision part, so dirt or a scored spool shows up immediately.

Common hydraulic valves on an excavator:

  • Main control valve: splits oil to the boom, arm, bucket cylinders and the motors.
  • Relief valve: caps pressure to protect the pump and lines.
  • Check valve: stops backflow and load drop.
  • Counterbalance and lock valves: hold cylinders and loads still on lever release.
  • Throttle and solenoid valves: trim flow and take control signals.

Depending on the fault, we work on individual spools and cartridges or replace the whole valve. Việt Trung Hải matches hydraulic valves by brand, machine model and the code cast on the valve body, with genuine and high-quality replacement stock in HCMC.

Wear signs

When to replace the hydraulic valve

  • Slow, uneven functions
  • Levers drift while holding load
  • Internal leak, loss of force
  • Sticking or harsh control feel

Technical handbook

Related guides

Find it

Order the exact part

Pick whichever suits you — our team confirms fitment, then quotes.

  1. By part number

    Send the number stamped on the old part for the exact match.

  2. By machine model

    e.g. Komatsu PC200-8, Hitachi ZX200 — send the model to match.

  3. By pump / motor series

    e.g. K3V112, A8VO107 — when you know the pump code.

Request a quote

FAQ

Frequently asked questions

Does a cylinder settling under load mean the valve is faulty?

A cylinder settling while holding usually means internal leak at the control valve, a check valve or a lock valve not sealing. Distinguish it from a leaking cylinder seal; measuring drop speed and testing the valve pinpoints the cause.

How do you fix jerky, on-off function from the valve?

Jerky action usually comes from a dirty or lightly scored spool that sticks. Often cleaning, lapping the spool and replacing a cartridge fixes it; deep scoring or heavy wear calls for a full valve replacement.

Can a hydraulic valve be repaired in parts or must the whole unit be replaced?

The valve block holds many spools, relief valves and check valves in one body, so faults can be handled section by section. Only when the body is pitted or several spools are worn together do we recommend replacing the whole unit.

What info is needed to order a hydraulic valve?

Send the brand, model and the code cast on the valve body; if you only need a small part like a relief valve, photograph that item too. Control valves are very model-specific, so the exact code ensures the oil ports match.

Get a quote

Need the right part, fast?

Send your machine model and the part you need — we confirm fitment and quote.

  • Pump code / plate
  • Machine model
  • Photo of the old part