Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851

Hydraulic system

Pump regulator

Pump regulator for the common construction-machinery hydraulic pump series.

Pump regulator
Chi tiết · PartPump regulator

Quick answer

Pump regulator: what is it?

The pump regulator is the control unit that varies the swash-plate angle to match the pump's flow and power to the load. When the regulator drifts or sticks, the pump delivers oil erratically, the controls go weak or creep on their own, and the machine loses power just when it needs to work hard.

  • Authorized JIC Hydraulics distributor
  • Nationwide delivery · HCMC warehouse
  • Wholesale and retail
  • Fitment confirmed before we quote

The regulator sits on the pump body and constantly commands the swash plate to tilt more or less, based on load pressure and the control signal. Because it governs both flow and the power limit, a misadjusted regulator can leave a machine as weak as a worn-out rotary group — while the pump internals are still fine. That is why the regulator is worth checking before you split the pump open.

Signs of a faulty regulator

  • Power loss under heavy load even though the pump isn't running hot
  • Erratic flow, controls fast one moment and slow the next
  • Controls that creep or won't hold a load
  • Flow that doesn't rise when you increase throttle
  • A sticking, notchy spool with delayed response

As JIC's authorized distributor for rotary groups and controls, Việt Trung Hải supplies regulators matched to K3V, A8VO and HPV pumps, genuine parts, with setup help and matching by pump code.

Hydraulic pump rotary group

Anatomy

Regulator inside the rotary group

The parts inside a piston pump work together to build flow and pressure. Tap any part to explore it and look it up.

  1. Rotary group
  2. Cylinder block
  3. Piston
  4. Shoe plate
  5. Swash plate
  6. Valve plate
  7. Drive shaft
  8. Ball guide & port plate
  9. Regulator

Wear signs

When to replace the pump regulator

  • Creeping controls, slow response
  • Pump won't up- or destroke
  • Inconsistent flow
  • Higher fuel use, machine feels down on power

Technical handbook

Related guides

Find it

Order the exact part

Pick whichever suits you — our team confirms fitment, then quotes.

  1. By part number

    Send the number stamped on the old part for the exact match.

  2. By machine model

    e.g. Komatsu PC200-8, Hitachi ZX200 — send the model to match.

  3. By pump / motor series

    e.g. K3V112, A8VO107 — when you know the pump code.

Request a quote

FAQ

Frequently asked questions

How do I tell weak power is from the regulator versus a worn rotary group?

If the pump isn't running unusually hot and the oil is clean but the machine is still weak and hunts, suspect the regulator. A worn rotary group usually brings hot oil and metal debris. Test and adjust the regulator before splitting the pump.

What does the regulator control in the pump?

It controls the swash-plate angle, and through that sets the pump's flow and power limit according to load and the control signal. In short, the regulator decides how much oil the pump delivers at any moment.

Can drifting controls be related to the regulator?

They can. A worn or sticking spool inside the regulator gives a false feedback signal, so flow won't stay steady and the controls creep. Rule out valves and seals as well before you conclude.

Can a wrong regulator be readjusted?

If only the setpoint has drifted, it can be reset to the pump's correct spec. But once the spool is worn or scored or the springs are weak, no adjustment holds and the regulator must be replaced with a correct unit.

Get a quote

Need the right part, fast?

Send your machine model and the part you need — we confirm fitment and quote.

  • Pump code / plate
  • Machine model
  • Photo of the old part