Hydraulic system
Travel motor
Complete travel motor and replacement parts for construction machinery.

Quick answer
Travel motor: what is it?
A travel motor is the hydraulic motor that drives the final drive to turn the tracks, moving the excavator forward, back and steering. When the motor weakens, the machine tends to pull to one side, travel slowly, whine, or leak oil at the travel unit. Việt Trung Hải supplies genuine and high-quality replacement travel motors, matched to the machine model.
- Authorized JIC Hydraulics distributor
- Nationwide delivery · HCMC warehouse
- Wholesale and retail
- Fitment confirmed before we quote
A travel motor sits in the sprocket-drive assembly, turning high-pressure oil from the main pump into the rotation that pulls the tracks. This is a motor, not a pump, so failure shows up most clearly in how the machine moves. Inside it still runs a piston-type rotary group (cylinder block, shoe plate, valve plate), so wear means lost power.
Signs your travel motor needs checking:
- The machine pulls to one side even with both levers pushed evenly.
- Travel speed drops noticeably, climbs feel gutless, one track is weaker.
- A whine or howl comes from the travel unit while moving.
- Oil leaks at the motor shaft seal or around the final-drive flange.
- The brake or counterbalance valve holds poorly, so the machine creeps when stopped on a slope.
Depending on condition, we rebuild it with a JIC rotary group (cylinder block, pistons, shoe plate, valve plate) or replace the whole motor. Tell us the brand and model and Việt Trung Hải matches the exact travel motor; genuine and high-quality replacement units are in stock at our HCMC warehouse with nationwide delivery.
Wear signs
When to replace the travel motor
- Machine tracks off, pulls to one side
- Slow or weak travel
- Whine while moving
- Oil leak at the motor
Technical handbook
Related guides
Find it
Order the exact part
Pick whichever suits you — our team confirms fitment, then quotes.
By part number
Send the number stamped on the old part for the exact match.
By machine model
e.g. Komatsu PC200-8, Hitachi ZX200 — send the model to match.
By pump / motor series
e.g. K3V112, A8VO107 — when you know the pump code.
FAQ
Frequently asked questions
Does pulling to one side mean the travel motor is bad?
Pulling usually means one travel motor is weaker than the other, but it can also be the control valve or the center swivel joint. Swap the oil lines across to confirm which motor is faulty before removing it.
Should a travel motor be rebuilt or fully replaced?
If only the rotary group is worn, a JIC rotary group is neat and economical. When the housing is cracked or the internal reduction gears are broken along with bad seals, replacing the whole motor is safer.
Does a travel motor come with the final-drive gearbox?
It depends. Some are sold as the hydraulic motor alone, others as the full final drive including the reduction gearbox and sprocket. Tell us which part failed so we quote the exact item and you don't overbuy.
What info is needed to order a travel motor?
Send the brand, model and machine weight class, plus any code cast on the motor housing if readable. Travel motors are graded by machine size, so the exact model ensures the flange and track fit.
Get a quote
Need the right part, fast?
Send your machine model and the part you need — we confirm fitment and quote.
- Pump code / plate
- Machine model
- Photo of the old part

