
Travel motor rotary group – Kayaba MAG150
Quick answer
The Kayaba MAG150 rotary group is the internal rebuild set (cylinder block, pistons, valve plate, shoe plate) for a MAG-series travel motor used on tracked hydraulic excavators.
Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies JIC groups cut to code alongside genuine ones, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Travel motor
- Brand / pump line
- Kayaba (KYB) · MAG
- Model code
- MAG150
- Condition
- New, correct code
- Availability
- On request
Kayaba MAG150 travel-motor rotary group
The MAG150 rotary group is the rebuild set inside a Kayaba (KYB) travel motor: cylinder block, pistons, valve plate, retainer and shoe plate. The travel motor drives the final drive and tracks so the excavator moves, reverses and steers, so this group takes the heaviest wear.
MAG150 belongs to the Kayaba MAG travel-motor family used on tracked hydraulic excavators. It replaces a worn rotating group while holding the original profile and clearance; send the machine and final-drive number to confirm the right build.
Symptoms and quote
Weak or one-sided travel, lost speed, internal leakage, unusual heat, knocking, or a scored valve plate signal a tired group. Việt Trung Hải is an authorized JIC Hydraulics distributor: the MAG150 group we ship is official JIC stock, cut to the code and to the fitting tolerances, so block, pistons and valve plate enter an original housing as a matched set and share load evenly. Genuine groups sit on the same shelf. Send your machine code for a fast quote.
Frequently asked questions
Which excavator does the MAG150 group fit?
MAG150 is a Kayaba travel motor used on tracked hydraulic excavators, with variants across the series. Send your machine code and motor number and Việt Trung Hải will confirm the exact rotary group before quoting.
When should I replace just the rotary group?
If the motor is weak, veers, leaks internally or knocks but the housing and shaft are sound, fitting a new rotary group (block, pistons, valve plate) brings the pull back without dropping the whole motor off the machine.
Can JIC internals replace the original group?
Yes. The JIC MAG150 rotary group is made to the correct spec with hardened material and precise machining to hold clearance and sealing like the original, fitting directly without modification.
Get a quote
Request a quote: Travel motor rotary group – Kayaba MAG150
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kayaba (KYB) · MAGSwash plate – Kayaba MAG150MAG150On requestView · get a quote
Kayaba (KYB) · MAGRetainer plate – Kayaba MAG150MAG150On requestView · get a quote
Kayaba (KYB) · MAGValve plate – Kayaba MAG150MAG150On requestView · get a quote
Kayaba (KYB) · MAGPiston – Kayaba MAG150MAG150On requestView · get a quote
Kayaba (KYB) · MAGBall guide – Kayaba MAG150MAG150On requestView · get a quote
Kayaba (KYB) · MAGCylinder block – Kayaba MAG150MAG150On requestView · get a quote
Kayaba (KYB) · MAGTravel motor rotary group – Kayaba MAG170MAG170On requestView · get a quote
Kayaba (KYB) · MAGRetainer plate – Kayaba MAG170MAG170On requestView · get a quoteTechnical handbook