Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Valve plate – Kayaba MAG150

Kayaba (KYB) · MAG

Valve plate – Kayaba MAG150

New, correct codeOn requestMAG150

Quick answer

The Kayaba MAG150 valve plate is the porting plate inside a KYB MAG-series travel motor on crawler excavators, timing each piston's intake and discharge.

Việt Trung Hải supplies the correct MAG150 plate, genuine and JIC, each cut to code and ready to fit a standard motor, with fast quotes.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Valve plate
Brand / pump line
Kayaba (KYB) · MAG
Model code
MAG150
Condition
New, correct code
Availability
On request

What the MAG150 valve plate fits

The valve plate is the porting plate pressed against the cylinder block that times each piston's intake and discharge. Inside a Kayaba (KYB) MAG-series travel motor, the MAG150 plate sits between the block and the motor cover, splitting the oil flow that drives the sprocket and tracks. MAG motors are track final-drive units on crawler excavators.

When to replace

A worn or scored valve plate lets oil leak across the sealing face, so the machine crawls weakly, pulls to one side, or loses power on grades and turns. Grooves, scoring, or heat discoloration mean it is time to replace it before the cylinder block and pistons are dragged down with it.

Choosing quality parts

Start from the MAG150 code. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies JIC MAG-series plates that are lapped flat, made from wear-resistant material and held to interchange tolerance, so they seat in a standard motor housing and the track pulls as it should. Genuine Kayaba plates are stocked as well, and quotes come back fast.

Frequently asked questions

Which motor does the MAG150 valve plate fit?

The MAG150 is a valve plate for Kayaba (KYB) MAG-series travel motors on crawler excavators. It sits between the cylinder block and the motor cover, distributing high and low pressure oil to each piston.

When should the travel motor valve plate be replaced?

Replace it when the machine crawls weakly, pulls to one side, or loses climbing power — usually from a worn, scored, or heat-discolored plate leaking oil. Change it early to avoid damaging the cylinder block and pistons.

Does Việt Trung Hải stock the MAG150 valve plate?

Yes. We keep the correct MAG150 plate in genuine and JIC Hydraulics form — Việt Trung Hải is an authorized JIC distributor, and the JIC plate is held to interchange tolerance so it fits a standard motor as it comes. Contact us for a fast quote and help matching your travel motor.

Get a quote

Request a quote: Valve plate – Kayaba MAG150

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides