Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Cylinder block – Kayaba MAG150

Kayaba (KYB) · MAG

Cylinder block – Kayaba MAG150

New, correct codeOn requestMAG150

Quick answer

The Kayaba MAG150 cylinder block is the rotating piston barrel inside the MAG travel motor, pressed against the valve plate to route oil that drives the final drive and tracks on mid-size crawler excavators.

Việt Trung Hải keeps genuine and JIC blocks to the same code that seal in the original motor — send the code MAG150 for a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Cylinder block
Brand / pump line
Kayaba (KYB) · MAG
Model code
MAG150
Condition
New, correct code
Availability
On request

Kayaba MAG150 cylinder block — where it fits

The cylinder block is the barrel holding the piston bores that rotate around the shaft, where pistons reciprocate to move oil. In the Kayaba MAG150 travel motor it is the main rotating part, held against the valve plate to route high-pressure oil that drives the final drive and moves the tracks. MAG150 belongs to Kayaba's MAG travel-motor family used on mid-size crawler excavators.

Wear signs and choosing quality

Weak or one-sided travel, slow crawling uphill, and internal leakage point to a worn block — a scored or dished valve-plate face, oval piston bores, loss of flow. If lapping the plate and pistons no longer restores the seal, replace the block. Việt Trung Hải, an authorized JIC Hydraulics distributor, keeps MAG150 blocks in genuine and JIC form: correct code, hardened material, and a valve-plate face cut to tolerance that seals in the original motor housing. Send the code MAG150 for a fast quote.

Frequently asked questions

Which motor does the MAG150 cylinder block fit?

MAG150 is a cylinder block for Kayaba MAG-series travel motors on mid-size crawler excavators. It rotates inside the motor against the valve plate to drive the final drive and tracks. Send the code MAG150 so we can confirm the exact model.

When should the cylinder block be replaced?

When travel is weak or one-sided, the machine crawls slowly uphill, or you see internal leakage and oil heating. A scored or pitted block face and oval piston bores confirm wear. If lapping does not restore sealing, replace the block.

Do you stock the MAG150 block for travel motors?

Yes. Việt Trung Hải is an authorized JIC Hydraulics distributor keeping MAG150 blocks in JIC and genuine form. The JIC block is made to the same code, with surface hardness and a valve-plate face to tolerance, so it seals in the original motor. Send the code for a quote.

Get a quote

Request a quote: Cylinder block – Kayaba MAG150

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides