Hydraulic system
Hydraulic seals
Hydraulic seals — sealing parts for hydraulic pumps, motors and cylinders.

Quick answer
Hydraulic seals: what are they?
Hydraulic seals are the sealing parts that keep pumps, motors and cylinders tight on construction machines — oil seals, piston seals, rod seals, dust seals and O-rings. Viet Trung Hai is an authorized distributor for PET Seals, NOK and SKF, supplying them singly or as full kits for most excavator lines. Replace them when a cylinder weeps oil, loses holding force, or when you overhaul a pump or motor.
- PET Seals · NOK · SKF distributor
- Nationwide delivery · HCMC warehouse
- Wholesale and retail
- Fitment confirmed before we quote
On excavators and heavy vehicles, hydraulic seals hold oil and pressure inside pumps, swing motors, travel motors and the cylinders that extend and retract. A worn seal is the most common reason a cylinder weeps oil, a boom drifts, or a load slowly sinks. Viet Trung Hai is an authorized PET Seals, NOK and SKF distributor and keeps seals in stock at our Ho Chi Minh City warehouse for shipping nationwide.
Common seal groups:
- Oil seals: stop leakage at pump and motor shafts.
- Piston seals: seal the piston against the cylinder bore to hold lifting force.
- Rod seals: keep oil from following the cylinder rod out.
- Dust / wiper seals: scrape dirt off the rod as it retracts.
- O-rings and backup rings: seal fittings and joints.
To get the right part, give us the machine model, pump code, or the code on the old seal; for a cylinder, measure the rod and bore. We supply seals individually or as complete kits, in genuine and high-quality replacement grades.
Wear signs
When to replace the hydraulic seals
- Oil leaking at shafts, pistons or joints
- Pressure loss, weak equipment
- Best replaced as a full kit at overhaul
- Dirt ingress causing rapid wear
Related part groups
All hydraulic seal partsTechnical handbook
Related guides
Find it
Order the exact part
Pick whichever suits you — our team confirms fitment, then quotes.
By part number
Send the number stamped on the old part for the exact match.
By machine model
e.g. Komatsu PC200-8, Hitachi ZX200 — send the model to match.
By pump / motor series
e.g. K3V112, A8VO107 — when you know the pump code.
FAQ
Frequently asked questions
How do I know a hydraulic seal has failed?
Typical signs are a cylinder weeping oil at the gland, a boom or arm drifting down under load, weak power, or an oil film around a pump or motor shaft. When you see these, inspect and replace the seals early.
Should I replace one seal or the whole set?
If the cylinder is already open or the machine is due for overhaul, fit the full kit for that cylinder or pump; one leak usually means the other same-age seals are close behind.
Is Viet Trung Hai an authorized PET Seals, NOK and SKF distributor?
Yes. Viet Trung Hai is an authorized distributor for PET Seals, NOK and SKF, so the seals have clear origin and can be matched by code.
Which machines do the seals fit?
We carry seals for pumps, motors and cylinders on Komatsu, Hitachi, Kobelco, Doosan, Hyundai and Caterpillar; give the machine model or the code on the old seal to match.
Get a quote
Need the right part, fast?
Send your machine model and the part you need — we confirm fitment and quote.
- Pump code / plate
- Machine model
- Photo of the old part