Hydraulic system
Seal kits
Seal kits — sealing parts for hydraulic pumps, motors and cylinders.

Quick answer
Seal kits: what are they?
A seal kit is the complete set of sealing parts for one specific cylinder, pump or motor — piston seal, rod seal, dust seal, plus the matching O-rings and backup rings. Fitting the whole kit at overhaul seals evenly and avoids opening the cylinder again just because one remaining seal wears out. Viet Trung Hai makes up seal kits to match your exact cylinder or machine model.
- PET Seals · NOK · SKF distributor
- Nationwide delivery · HCMC warehouse
- Wholesale and retail
- Fitment confirmed before we quote
A seal kit is packed for one specific cylinder, pump or motor, so every piece inside matches that assembly's grooves and sizes. Replacing a single seal looks cheaper, but all the seals in one cylinder have run the same hours; patch one and another soon weeps, and the cylinder comes apart again. Once the cylinder is open, fitting the whole kit is the cheapest use of labour. Viet Trung Hai stocks seal kits for many excavator generations at our Ho Chi Minh City warehouse.
A typical cylinder seal kit contains:
- Piston seal that holds the pressure chamber.
- Rod seal that stops oil following the rod out.
- Dust / wiper seal that scrapes grit at the gland.
- O-rings and backup rings for the joints.
- Wear (guide) rings that support the piston and rod.
- Gland and head gaskets.
To match the right kit, tell us the machine model and cylinder position (boom, arm or bucket), or the cylinder code; for pumps and motors, give the assembly code. Available in genuine and high-quality replacement grades.
Wear signs
When to replace the seal kits
- Oil leaking at shafts, pistons or joints
- Pressure loss, weak equipment
- Best replaced as a full kit at overhaul
- Dirt ingress causing rapid wear
Related part groups
All hydraulic seal partsFind it
Order the exact part
Pick whichever suits you — our team confirms fitment, then quotes.
By part number
Send the number stamped on the old part for the exact match.
By machine model
e.g. Komatsu PC200-8, Hitachi ZX200 — send the model to match.
By pump / motor series
e.g. K3V112, A8VO107 — when you know the pump code.
FAQ
Frequently asked questions
How do I know which seal kit fits my cylinder?
Give the machine model and the cylinder position (boom, arm or bucket) or read the code stamped on the cylinder; for pumps and motors, give the assembly code so we match the right kit.
Why fit the whole kit instead of one seal?
All the seals in one cylinder have run the same hours and wear at a similar rate; fitting the full kit while the cylinder is open avoids a second teardown and seals evenly.
Is a pump or motor seal kit different from a cylinder kit?
Yes, the contents differ; a cylinder kit centers on piston, rod and dust seals, while a pump or motor kit adds shaft seals and assembly gaskets. Give the assembly code to match.
Get a quote
Need the right part, fast?
Send your machine model and the part you need — we confirm fitment and quote.
- Pump code / plate
- Machine model
- Photo of the old part