Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851

Hydraulic system

Valve plate

Valve plate for the common construction-machinery hydraulic pump series.

Valve plate
Chi tiết · PartValve plate

Quick answer

Valve plate: what is it?

The valve plate is the fixed timing plate that the cylinder block rotates against: its two kidney-shaped slots split the oil into an intake and a discharge side and time when each piston bore opens and closes. When the valve plate is scored or pitted, oil crosses between the two ports, so the pump overheats and loses pressure.

  • Authorized JIC Hydraulics distributor
  • Nationwide delivery · HCMC warehouse
  • Wholesale and retail
  • Fitment confirmed before we quote

The valve plate sits between the cylinder block and the pump cover, standing still while the block spins against its face. Because a thin oil film always separates the two surfaces, any scratch, pit or uneven wear on the valve plate lets high-pressure oil slip back toward the intake — a cross-port leak. The pump then runs both hot and weak, and the heavier the load, the clearer it shows.

Symptoms of a failing valve plate

Symptom Common cause
Unusual overheating Cross-port leak through scoring on the plate
Pressure sag under load Oil film not sealing, oil flows backward
Rhythmic noise and vibration Uneven wear mistimes port opening
Bronze flake in the oil Plate coating flaking from dirt or oil starvation

A valve plate usually wears at the same time as the block's kidney face, so lap or replace both together. Việt Trung Hải supplies valve plates matched to K3V, A8VO and HPV pumps, genuine parts, with full rotary groups available too.

Hydraulic pump rotary group

Anatomy

Valve plate inside the rotary group

The parts inside a piston pump work together to build flow and pressure. Tap any part to explore it and look it up.

  1. Rotary group
  2. Cylinder block
  3. Piston
  4. Shoe plate
  5. Swash plate
  6. Valve plate
  7. Drive shaft
  8. Ball guide & port plate
  9. Regulator

Wear signs

When to replace the valve plate

  • Cross-port leak, oil heats quickly
  • Loss of pressure, weak pump
  • Scoring or wear rings on the sealing face
  • Performance drops as the machine warms

Compatibility

Pump series we supply valve plate for

Pump / motor seriesMakerProducts
A8VOUchida/Rexroth8 products
HPVKomatsu8 products
M2XKawasaki8 products
A10VUchida/Rexroth7 products
K3VKawasaki5 products
PSVKayaba (KYB)5 products
K5VKawasaki4 products
MSFKayaba (KYB)4 products
DNBKawasaki3 products
MAGKayaba (KYB)2 products
K3SPKawasaki1 product
K7VKawasaki1 product

Send the pump code or machine model and we'll confirm the exact fit before quoting.

More Valve plate codes (65)

Find it

Order the exact part

Pick whichever suits you — our team confirms fitment, then quotes.

  1. By part number

    Send the number stamped on the old part for the exact match.

  2. By machine model

    e.g. Komatsu PC200-8, Hitachi ZX200 — send the model to match.

  3. By pump / motor series

    e.g. K3V112, A8VO107 — when you know the pump code.

Request a quote

FAQ

Frequently asked questions

How is the valve plate different from the shoe plate and swash plate?

The valve plate is the fixed plate that splits intake from discharge and times oil delivery, sitting at the back of the cylinder block. The shoe plate holds the piston shoes down, while the swash plate is the tilted plate that sets piston stroke — three parts with distinct jobs.

Can a hot, weak pump be caused by the valve plate?

Very often yes: a cross-port leak at the valve plate loops high-pressure oil back to intake, making heat and losing flow. To confirm, open the pump and inspect the plate and kidney face for scoring or pitting.

Can a scored valve plate be lapped?

Shallow marks can be very lightly lapped to bring the face back flat, but once the wear cuts through the surface layer or pits deeply it must be replaced, as more lapping thins it and mistimes the ports. The plate's surface coating can't be rebuilt.

Does it matter if the valve plate is fitted the wrong way round?

Yes — many valve plates are asymmetric for one direction of rotation, so fitting it reversed mistimes the ports and the pump won't build pressure or runs loud. Follow the locating mark and slot layout, and choose the correct plate by pump code.

Get a quote

Need the right part, fast?

Send your machine model and the part you need — we confirm fitment and quote.

  • Pump code / plate
  • Machine model
  • Photo of the old part