
Valve plate – Kawasaki DNB808
Quick answer
The Kawasaki DNB808 valve plate is the porting plate pressed against the cylinder block that times each piston's intake and discharge in a Kawasaki axial-piston pump. Việt Trung Hải supplies JIC DNB808 plates with the ports and lapped face held to the drawing, so they seal in the original pump. Fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Valve plate
- Brand / pump line
- Kawasaki · DNB
- Model code
- DNB808
- SKU
- 2021-590-1-131
- Condition
- New, correct code
- Availability
- On request
What the Kawasaki DNB808 valve plate does
The DNB808 is the porting plate pressed against the cylinder block that times each piston's intake and discharge in the pump. It sits inside a Kawasaki axial-piston pump used on hydraulic excavators. Its lapped face runs directly against the rotating block under working pressure, so its flatness and finish govern the pump's flow and efficiency.
Signs it needs replacing
As the plate scores, wears or pits, high-pressure oil leaks back to the low-pressure side. The machine loses power, lifts loads slowly, the pump whines under load and the oil heats up. Deep scoring or burn marks mean the valve plate, often with the cylinder block, should be replaced.
Choosing quality parts
Việt Trung Hải is an authorized JIC Hydraulics distributor, supplying JIC valve plates to the DNB808 code: ports and lapped face held to the drawing, so the plate seals in the original pump and brings the working clearance back to new. Technical advice and a fast quote come with it.
Frequently asked questions
Which pump does the DNB808 valve plate fit?
The DNB808 is a valve plate for Kawasaki axial-piston pumps on hydraulic excavators. Because each pump version uses its own plate code, send your pump code or a photo of the old plate so Việt Trung Hải can confirm the exact match before quoting.
How do I know the valve plate is worn?
Common signs are weak lifting, slow load handling, a whining pump under load and oil that heats up fast. Once opened, a scored, burnt or pitted lapped face means the valve plate should be replaced to restore sealing.
Should I replace the valve plate together with the cylinder block?
Usually yes. The valve plate and cylinder block wear as a mated pair, so if one face is deeply scored the other is often worn too. Replacing them together restores sealing and avoids early repeat failure. Việt Trung Hải can advise the right set.
Get a quote
Request a quote: Valve plate – Kawasaki DNB808
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · DNBCylinder block – Kawasaki DNB808DNB808On requestView · get a quote
Kawasaki · DNBRotary group kit – Kawasaki DNB08DNB08On requestView · get a quote
Kawasaki · DNBRotary group kit – Kawasaki DNB50DNB50On requestView · get a quote
Kawasaki · DNBDrive shaft – Kawasaki DNB08DNB08On requestView · get a quote
Kawasaki · DNBSwash plate – Kawasaki DNB50DNB50On requestView · get a quote
Kawasaki · DNBRetainer plate – Kawasaki DNB08DNB08On requestView · get a quote
Kawasaki · DNBRetainer plate – Kawasaki DNB50DNB50On requestView · get a quote
Kawasaki · DNBFriction plate – Kawasaki DNB50DNB50On requestView · get a quoteTechnical handbook