
Retainer plate – Kawasaki DNB08
Quick answer
The Kawasaki DNB08 is a rotary-group plate that, with the ball guide, holds the piston shoes square against the swash plate in a Kawasaki axial-piston pump. It belongs to the DNB range for Kawasaki main pumps on hydraulic excavators.
Việt Trung Hải supplies genuine and JIC DNB08 plates made to code that hold the shoes square in the original rotary group, with fast quotes.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Ball guide & port plate
- Brand / pump line
- Kawasaki · DNB
- Model code
- DNB08
- SKU
- 2021-590-1-70
- Condition
- New, correct code
- Availability
- On request
Kawasaki DNB08 retainer plate — what it fits
The DNB08 plate sits in the rotary group of a Kawasaki axial-piston pump. Together with the ball guide, it holds the piston shoes square against the swash plate through every rotation, keeping the pistons stroking evenly and flow steady. It belongs to the DNB parts range for Kawasaki main pumps on hydraulic excavators.
Signs it needs replacing
As the retainer holes and ball guide wear, the shoes tilt and lift off the swash plate. Expect weak pumping, slow cylinders, pressure loss under load, overheating, a knocking noise, and metal debris in the oil. Left too long, shoes can flake or break away and damage the swash plate and cylinder block.
Choosing quality parts
A good plate needs the right material, correct hardness, and precisely machined holes and spherical seat. As an authorized JIC Hydraulics distributor, Việt Trung Hải stocks DNB08 plates from genuine and from JIC — the JIC plate is cut to the same code and interchange tolerance, so it holds the shoes square in the original rotary group. Send your pump number for a fast quote.
Frequently asked questions
Which pump does the DNB08 plate fit?
DNB08 is a rotary-group part for Kawasaki axial-piston main pumps used on hydraulic excavators. Send your pump number or a photo of the old part and Việt Trung Hải will confirm the correct code and advise on the matching shoe assembly.
When should the plate and ball guide be replaced?
Replace them when the pump feels weak, cylinders are slow, pressure drops under load, oil overheats, or you hear knocking and find metal debris. These point to worn retainer holes and shoes lifting off the swash plate; act early to avoid wider damage.
Does Việt Trung Hải stock the Kawasaki DNB08 plate?
Yes. As an authorized JIC Hydraulics distributor, Việt Trung Hải keeps DNB08 plates from genuine and from JIC on the shelf, each made to code and fitting the original rotary group as it is. Send your pump number for a fast quote and a stock check.
Get a quote
Request a quote: Retainer plate – Kawasaki DNB08
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · DNBRotary group kit – Kawasaki DNB08DNB08On requestView · get a quote
Kawasaki · DNBDrive shaft – Kawasaki DNB08DNB08On requestView · get a quote
Kawasaki · DNBPin – Kawasaki DNB08DNB08On requestView · get a quote
Kawasaki · DNBPiston – Kawasaki DNB08DNB08On requestView · get a quote
Kawasaki · DNBBall guide – Kawasaki DNB08DNB08On requestView · get a quote
Kawasaki · DNBRotary group kit – Kawasaki DNB50DNB50On requestView · get a quote
Kawasaki · DNBSwash plate – Kawasaki DNB50DNB50On requestView · get a quote
Kawasaki · DNBRetainer plate – Kawasaki DNB50DNB50On requestView · get a quoteTechnical handbook