
Piston – Kawasaki DNB08
Quick answer
The DNB08 piston is the reciprocating element inside the cylinder block of a Kawasaki axial-piston pump, drawing and forcing oil to build the flow and pressure a hydraulic excavator needs.
Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies correct-code JIC DNB08 pistons that fit the original block directly, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Piston
- Brand / pump line
- Kawasaki · DNB
- Model code
- DNB08
- SKU
- 2021-590-1-164
- Condition
- New, correct code
- Availability
- On request
What the DNB08 piston does
The piston is the reciprocating element inside the cylinder block of a Kawasaki axial-piston pump, riding the swash plate through its slipper shoe. As the shaft turns, each piston draws oil on the intake stroke and forces it out on discharge — turning engine rotation into hydraulic flow and pressure. DNB08 is the piston code for Kawasaki main pumps on hydraulic excavators.
When to replace
Worn or scored pistons show up as a machine that grows weak and slow — boom, arm and travel lag, worst once the oil heats up. Whining, overheating oil, lost pressure under load or metal particles in the oil point to loose pistons and shoes. Scoring down the piston body or a flaked shoe face means replacing the set.
Choosing quality parts
Piston-to-bore clearance is tight, so material, heat treatment and machining decide pump life. Việt Trung Hải is an authorized JIC Hydraulics distributor: JIC builds the DNB08 to its own code and fit tolerance, so the pistons go into the original block with no honing or lapping. Genuine Kawasaki pistons are on the shelf as well. Contact us for a fast quote.
Frequently asked questions
Which pump does the Kawasaki DNB08 piston fit?
DNB08 is the piston code for Kawasaki axial-piston main pumps used on hydraulic excavators. To match the right set to your pump, send Việt Trung Hải your pump model or machine number and we will confirm the fit and quote quickly.
How do I know the pistons are worn?
When the machine grows weak and slow — lifting, curling and travel lag, worst once the oil is hot — along with a whining pump, lost pressure under load or metal particles in the oil, the pistons and shoes are likely worn with excessive clearance.
Do JIC pistons need honing or lapping to fit the original DNB08 block?
No. JIC machines the DNB08 to code and to the fit tolerance, so the pistons reach correct clearance in the original block — clean them, oil them and assemble. If the bores are scored or bell-mouthed, the block itself needs attention; that is not a piston issue.
Get a quote
Request a quote: Piston – Kawasaki DNB08
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · DNBRotary group kit – Kawasaki DNB08DNB08On requestView · get a quote
Kawasaki · DNBDrive shaft – Kawasaki DNB08DNB08On requestView · get a quote
Kawasaki · DNBRetainer plate – Kawasaki DNB08DNB08On requestView · get a quote
Kawasaki · DNBPin – Kawasaki DNB08DNB08On requestView · get a quote
Kawasaki · DNBBall guide – Kawasaki DNB08DNB08On requestView · get a quote
Kawasaki · DNBRotary group kit – Kawasaki DNB50DNB50On requestView · get a quote
Kawasaki · DNBSwash plate – Kawasaki DNB50DNB50On requestView · get a quote
Kawasaki · DNBRetainer plate – Kawasaki DNB50DNB50On requestView · get a quoteTechnical handbook