Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Pin – Kawasaki DNB08

Kawasaki · DNB

Pin – Kawasaki DNB08

New, correct codeOn requestDNB08

Quick answer

The Kawasaki DNB08 piston (pin) is a moving part of the hydraulic pump rotary group; it strokes inside the cylinder block to generate flow and pressure for the Kawasaki DNB-series main pump.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies genuine and JIC DNB08 pistons ground to interchange tolerance for a direct fit, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Kawasaki · DNB
Model code
DNB08
SKU
2021-590-1-159
Condition
New, correct code
Availability
On request

Kawasaki DNB08 pump piston — what it is

The piston (pin) is the core moving part of the rotary group — the rotating assembly (cylinder block, pistons, valve plate, swash plate, drive shaft) that makes a pump's flow and pressure. As the block turns against the angled swash plate, each piston strokes in its bore to draw and discharge oil. The DNB08 set fits the Kawasaki DNB-series piston pump; it must match code DNB08 to seat in the block.

Signs of wear

As pistons and bores wear, clearance opens and internal leakage rises: the machine slows, digging force drops, oil heats quickly, and the pump often runs fine cold but weakens hot. Scoring on a piston body or shoe damage means it is time to open the rotary group.

Quality and correct code

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies JIC DNB08 pistons — correct material, hardening and precision grinding to interchange tolerance, so they slide into the original block bores at the right clearance. Genuine parts also in stock, fast quote by pump model.

Frequently asked questions

Which pump does the Kawasaki DNB08 piston fit?

DNB08 is a piston (pin) from the Kawasaki DNB-series piston pump rotary group, used on the main pump of excavators. Send Việt Trung Hải your pump code and machine number and we will confirm the exact piston and shoe before quoting.

How do I know the pump pistons are worn?

The pump weakens, boom and arm slow down, digging force drops, oil heats quickly, metal particles appear in the oil, or the pump runs fine cold but weakens hot. If pistons show scoring or shoe damage when opened, replace the set.

Does a JIC piston need the DNB08 block bore reamed?

No. Việt Trung Hải is an authorized JIC Hydraulics distributor; JIC DNB08 pistons use the correct material and hardening and are ground to interchange tolerance, so they run at the right clearance in the original block, holding pressure under load. If the bore is scored or bell-mouthed, that is the block to sort out, not the piston.

Get a quote

Request a quote: Pin – Kawasaki DNB08

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides