Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Retainer plate – Kawasaki DNB50

Kawasaki · DNB

Retainer plate – Kawasaki DNB50

New, correct codeOn requestDNB50

Quick answer

The Kawasaki DNB50 port plate is the oil-distribution face in an axial piston pump; with the ball guide it keeps the piston shoes seated on the swash plate. It fits Kawasaki DNB-series pumps on excavators and hydraulic equipment.

Việt Trung Hải stocks genuine and JIC plates to the exact code, lapped to seal against the original cylinder block, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Ball guide & port plate
Brand / pump line
Kawasaki · DNB
Model code
DNB50
SKU
2021-590-1-71
Condition
New, correct code
Availability
On request

Kawasaki DNB50 port plate — where it fits

The port plate (valve plate) is the fixed oil-distribution face inside an axial piston pump. The rotating cylinder block slides against its lapped surface, and the kidney-shaped ports alternately connect each piston chamber to the suction and delivery sides. With the ball guide, it keeps the piston shoes seated at the correct angle on the swash plate. DNB50 fits Kawasaki DNB-series hydraulic pumps used on excavators and hydraulic equipment.

Wear signs

Scoring, pitting, or a copper tint on the face are the clearest signs. As the surface loses flatness, internal leakage rises: weak pump, slow pressure build-up, sluggish digging, fast oil heating, and whine. Inspect the piston shoes and swash plate at the same time.

Choosing quality

Việt Trung Hải, an authorized JIC Hydraulics distributor, keeps DNB50 port plates from genuine and from JIC in stock — hardened steel, lapped to interchange tolerance, sealing against the original cylinder block the way a new pump did. Send your pump code for a fast quote.

Frequently asked questions

Which pump does the DNB50 port plate fit?

DNB50 is the port plate for Kawasaki DNB-series hydraulic pumps used on excavators and hydraulic equipment. Because it varies by rotation direction and pump version, send your pump code or a photo of the pump so we confirm the correct part before quoting.

How do I know the port plate is worn?

Open the pump and check the sliding face: deep scoring, pitting, or a copper tint means the seal is gone. In use you will see weak pressure, slow build-up, fast oil heating, and whine. Replace the shoes and swash plate together if worn.

Do you stock the DNB50 port plate for each pump build?

Yes. Việt Trung Hải is an authorized JIC Hydraulics distributor and holds DNB50 port plates for the common DNB builds, genuine as well as JIC lapped to interchange tolerance. Send your pump code for a fast quote and fitting advice.

Get a quote

Request a quote: Retainer plate – Kawasaki DNB50

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides