
Cylinder block – Kawasaki DNB50
Quick answer
The Kawasaki DNB50 cylinder block is the barrel holding the piston bores that rotate around the drive shaft — the core part of the Kawasaki DNB-series piston pump on hydraulic excavators.
Việt Trung Hải, an authorized JIC distributor, supplies the DNB50 in JIC and genuine form, each on the correct code, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Cylinder block
- Brand / pump line
- Kawasaki · DNB
- Model code
- DNB50
- SKU
- 2021-590-1-238
- Condition
- New, correct code
- Availability
- On request
What the Kawasaki DNB50 cylinder block does
The DNB50 cylinder block is the barrel holding the piston bores that rotate around the drive shaft; pistons reciprocate inside to draw and push hydraulic oil. It is the core rotating part of the Kawasaki DNB-series piston pump used on hydraulic excavators.
Signs it needs replacing
When the block face against the valve plate wears, scores or pits, oil leaks internally: the pump loses power, lifting and travel slow down, and the pump runs hot and knocks under load. Deep scoring means replacing the block together with its piston set.
Choosing the right part
Việt Trung Hải is an authorized JIC Hydraulics distributor. The JIC Kawasaki DNB50 block is made on the correct code, with the right material, surface hardness and bore sizes, so your existing piston set lands on the proper clearance and the whole rotating group turns evenly against the valve plate. Genuine blocks are on the shelf too. Call us for the correct code and a fast quote.
Frequently asked questions
Which pump does the Kawasaki DNB50 cylinder block fit?
The DNB50 is the cylinder block for the Kawasaki DNB-series piston pump used on hydraulic excavators. Việt Trung Hải confirms the exact code against your pump model and machine serial before quoting to avoid a mismatch.
When should the cylinder block be replaced?
Replace it when the block face against the valve plate wears, scores or pits, causing internal leakage — the pump loses power, slows lifting and travel, and runs hot. With deep scoring, replace the block with its piston set.
Should I change the DNB50 block alone or the whole rotating group?
If the block face is only lightly worn and piston clearances are still inside tolerance, the block on its own will do. Once there is metal in the oil or the pistons are loose, change block, pistons and valve plate together so the group runs true again. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the full set on code with a fast quote.
Get a quote
Request a quote: Cylinder block – Kawasaki DNB50
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · DNBRotary group kit – Kawasaki DNB50DNB50On requestView · get a quote
Kawasaki · DNBSwash plate – Kawasaki DNB50DNB50On requestView · get a quote
Kawasaki · DNBRetainer plate – Kawasaki DNB50DNB50On requestView · get a quote
Kawasaki · DNBFriction plate – Kawasaki DNB50DNB50On requestView · get a quote
Kawasaki · DNBValve plate – Kawasaki DNB50DNB50On requestView · get a quote
Kawasaki · DNBPiston – Kawasaki DNB50DNB50On requestView · get a quote
Kawasaki · DNBBall guide – Kawasaki DNB50DNB50On requestView · get a quote
Kawasaki · DNBRotary group kit – Kawasaki DNB08DNB08On requestView · get a quoteTechnical handbook