Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Valve plate – Kawasaki DNB50

Kawasaki · DNB

Valve plate – Kawasaki DNB50

New, correct codeOn requestDNB50

Quick answer

The Kawasaki DNB50 valve plate is the porting plate pressed against the cylinder block, timing each piston's intake and discharge in Kawasaki DNB-series hydraulic pump units. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies JIC DNB50 plates lapped flat to the code, so they seal in the original pump. Fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Valve plate
Brand / pump line
Kawasaki · DNB
Model code
DNB50
SKU
2021-590-1-130
Condition
New, correct code
Availability
On request

Kawasaki DNB50 valve plate — where it fits

The DNB50 valve plate is the porting plate pressed against the cylinder block, timing each piston's intake and discharge. It belongs to Kawasaki's DNB-series hydraulic pump/motor unit; the correct DNB50 plate keeps the kidney ports aligned with the block and swash so the unit builds pressure as designed. A wrong or misaligned plate leaves the pump weak and running hot.

Signs it needs replacing

A worn valve plate shows scoring, pitting or wear grooves on the running face; a blue-purple heat tint means the clearances have opened up. You then see internal leakage, weak pump output, slow cylinders, sluggish work under load and quickly rising oil temperature.

Choosing quality parts

Material, surface hardness and flatness decide how long the plate lasts. As an authorized JIC Hydraulics distributor, Việt Trung Hải supplies JIC DNB50 plates — alloy steel, surface hardened, lapped flat to the code, so they go into the original pump sealed and ready with no extra machining. Send your machine and pump number for a fast quote.

Frequently asked questions

Which pump does the DNB50 valve plate fit?

It is the valve plate for Kawasaki DNB-series hydraulic pump/motor units. Send the machine number and the pump code on the nameplate so Việt Trung Hải can match the exact part and avoid a mis-fit that costs pressure.

How do I know the valve plate is worn?

Check the running face for scoring, pitting, wear grooves or a blue-purple heat tint. Combined with weak pump output, slow cylinders and quickly overheating oil, these point to a worn valve plate that should be replaced.

Do I have to lap the block when fitting a JIC DNB50 plate?

No. The JIC DNB50 plate is lapped flat to the code, so it seals straight into the original pump. Only a block face that is already deeply scored or pitted needs attention; the plate itself goes in and works. Việt Trung Hải advises on the pump code and quotes fast.

Get a quote

Request a quote: Valve plate – Kawasaki DNB50

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides