Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Swash plate – Kawasaki DNB50

Kawasaki · DNB

Swash plate – Kawasaki DNB50

New, correct codeOn requestDNB50

Quick answer

The DNB50 swash plate is the fixed angled plate in the Kawasaki DNB-series axial-piston pump; its tilt sets piston stroke and pump flow.

Việt Trung Hải stocks genuine Kawasaki plates and JIC plates, same code and same interchange tolerance.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Swash plate
Brand / pump line
Kawasaki · DNB
Model code
DNB50
SKU
2021-590-1-32
Condition
New, correct code
Availability
On request

What the Kawasaki DNB50 swash plate is

The swash plate is the fixed, angled plate inside the Kawasaki DNB-series axial-piston pump. As the cylinder block spins, the piston shoes slide across its face; the plate's tilt angle sets how far each piston strokes and therefore the pump's oil flow. DNB50 belongs to the Kawasaki DNB pump family. A flat, hard, mirror-smooth face is what keeps flow and pressure steady.

Signs of wear

  • A scored, pitted or dished sliding face where the shoes run.
  • Weak pump output and slow, sluggish operation under load.
  • Hydraulic oil overheating and unusual pump noise.
  • Metal debris in the oil and on the filter screen.

A dished or scored face drops pressure and wears the piston shoes with it — inspect the shoes and pistons together when you replace the plate.

Choosing quality parts

Flatness, hardness and surface finish decide how long the plate lasts and how well the pump performs. Việt Trung Hải distributes for JIC Hydraulics under authorization: the JIC DNB50 plate is cut to the same code and its running face ground to interchange tolerance, so it seats in the original pump housing with no reaming or lapping. Genuine Kawasaki plates sit on the same shelf. Send your pump code or a photo for the right match and a fast quote.

Frequently asked questions

Which pump does the DNB50 swash plate fit?

The Kawasaki DNB-series axial-piston pump, code DNB50.

When should the swash plate be replaced?

When the face is scored, pitted or dished, the pump is weak, oil overheats and there is metal debris; check the piston shoes too.

Does a JIC plate need lapping before it goes into a DNB50 pump?

No. JIC cuts it to the DNB50 code and to interchange tolerance, so it seats in the original housing as it comes. Việt Trung Hải also stocks genuine Kawasaki plates.

Get a quote

Request a quote: Swash plate – Kawasaki DNB50

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides