Hydraulic system
Gear pump
Complete gear pump and replacement parts for construction machinery.

Quick answer
Gear pump: what is it?
A gear pump is a fixed-displacement hydraulic pump, simple and cheaper than a piston pump, usually serving as the pilot, charge or auxiliary pump on excavators and machinery. It delivers a steady flow for control circuits and lubrication, gives little trouble and is easy to swap. Việt Trung Hải supplies genuine and high-quality replacement gear pumps to suit the machine.
- Authorized JIC Hydraulics distributor
- Nationwide delivery · HCMC warehouse
- Wholesale and retail
- Fitment confirmed before we quote
A gear pump moves oil with two meshing gears, giving a fixed flow per revolution. Unlike a piston pump that varies flow and takes very high pressure, a gear pump runs at moderate pressure but is simpler, tougher and far cheaper. That's why it rarely serves as the main pump and instead handles steady-flow duties.
Where gear pumps are typically used:
- Pilot pump: builds the control pressure for the joysticks and control valve.
- Charge pump: feeds priming oil to the main piston pump and closed loop.
- Auxiliary pump: drives cooling fans, lubrication or accessory circuits.
- On cranes, forklifts and construction machines needing simple, continuous flow.
A failing gear pump usually shows as dropping pilot pressure, light or vague controls, oil leaking at the flange, or loud noise when running. In most cases replacing the whole unit is faster and cheaper than piecemeal repair. Việt Trung Hải matches gear pumps by brand, machine model and the code on the pump body, with genuine and high-quality replacement stock in HCMC and nationwide delivery.
Find it
Order the exact part
Pick whichever suits you — our team confirms fitment, then quotes.
By part number
Send the number stamped on the old part for the exact match.
By machine model
e.g. Komatsu PC200-8, Hitachi ZX200 — send the model to match.
By pump / motor series
e.g. K3V112, A8VO107 — when you know the pump code.
FAQ
Frequently asked questions
Why not just use a cheaper gear pump as the main pump?
A gear pump runs a fixed flow at lower pressure, so it can't handle heavy digging and lifting the way a piston pump does. It suits pilot and charge duty needing steady flow, while heavy loads still require a piston pump.
Do light joysticks and slow response point to the gear pump?
If the gear-type pilot pump is weak, control pressure drops, so joysticks feel light and the valve doesn't open fully, slowing response. Measure pilot pressure first; low pressure with a healthy main pump points to the gear pump.
Should a bad gear pump be repaired or replaced?
Gear pumps are simple and affordable, so most are replaced as a whole unit for speed and durability, with no worry of post-repair play. Only some larger types are worth a new gear set and seals; we advise per model.
What's needed to order a gear pump?
Send the code on the pump body, the brand and model, and say what the pump does (pilot, charge or auxiliary). Gear pumps differ in gear count, flange type and rotation direction, so the exact match ensures a proper fit.
Get a quote
Need the right part, fast?
Send your machine model and the part you need — we confirm fitment and quote.
- Pump code / plate
- Machine model
- Photo of the old part