Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851

Hydraulic system

Shoe plate

Shoe plate for the common construction-machinery hydraulic pump series.

Shoe plate
Chi tiết · PartShoe plate

Quick answer

Shoe plate: what is it?

The shoe plate is the hold-down retainer that presses the piston shoes flat against the swash plate so they slide evenly as the rotary group turns. The shoe plate only holds the shoes down; it does not set pump displacement — that is the swash plate's job. When the shoe plate wears, the shoes lift off the swash plate, causing a knock and shedding bronze into the oil.

  • Authorized JIC Hydraulics distributor
  • Nationwide delivery · HCMC warehouse
  • Wholesale and retail
  • Fitment confirmed before we quote

People often confuse the shoe plate with the swash plate because both involve the piston shoes, yet their jobs are quite different: the swash plate is the tilted plate that creates piston stroke, while the shoe plate is simply the retainer that keeps the shoes bearing evenly on it. Thanks to the shoe plate, the shoes don't lift during the intake stroke, so the bores fill and the pump runs smoothly.

Signs of a worn shoe plate

  • A steady knock in time with the shaft, worse on fast load reversals
  • Piston shoes that lift and rock off the swash plate when checked by hand
  • Bronze debris and gold-colored flake on the filter and in the case
  • Shoe pockets in the plate worn oval and no longer gripping
  • Poor suction, aeration and wandering flow at light load

A worn shoe plate rarely fails alone — it usually comes with tired shoes and a swash plate, so inspect the whole group. Việt Trung Hải carries shoe plates and full rotary groups for K3V, A8VO and HPV, genuine parts, nationwide delivery.

Hydraulic pump rotary group

Anatomy

Shoe plate inside the rotary group

The parts inside a piston pump work together to build flow and pressure. Tap any part to explore it and look it up.

  1. Rotary group
  2. Cylinder block
  3. Piston
  4. Shoe plate
  5. Swash plate
  6. Valve plate
  7. Drive shaft
  8. Ball guide & port plate
  9. Regulator

Wear signs

When to replace the shoe plate

  • Piston shoes lift, knocking noise
  • Uneven wear on the retainer plate
  • Bronze/metal particles in the oil
  • Pump noisy on start-up

Compatibility

Pump series we supply shoe plate for

Pump / motor seriesMakerProducts
HPVKomatsu10 products
A10VUchida/Rexroth4 products
K3VKawasaki4 products
K5VKawasaki4 products
M2XKawasaki3 products
MSFKayaba (KYB)2 products
K7VKawasaki1 product
PSVKayaba (KYB)1 product

Send the pump code or machine model and we'll confirm the exact fit before quoting.

Find it

Order the exact part

Pick whichever suits you — our team confirms fitment, then quotes.

  1. By part number

    Send the number stamped on the old part for the exact match.

  2. By machine model

    e.g. Komatsu PC200-8, Hitachi ZX200 — send the model to match.

  3. By pump / motor series

    e.g. K3V112, A8VO107 — when you know the pump code.

Request a quote

FAQ

Frequently asked questions

Does the shoe plate control pump displacement?

No. The shoe plate only holds the piston shoes against the swash plate; displacement is set by the swash-plate angle and the resulting piston stroke. This is the most common mix-up between the two parts.

What do you hear and see when the shoe plate is worn?

The clearest sign is a steady knock in time with the shaft as shoes lift and slap back, along with bronze debris in the oil. If the shoes rock loose off the swash plate by hand, the shoe plate has stopped holding them.

When replacing the shoe plate, should the piston shoes be replaced too?

Usually yes. A worn shoe plate has often already loosened the shoes and pitted their faces, so old shoes in a new plate fail again quickly. Renewing the shoe plate and piston set together holds the correct clearance.

Can a worn shoe plate damage the swash plate?

Yes. When the shoe plate doesn't hold firmly, the shoes lift and hammer the swash plate, over time pitting and scoring its face. Address a worn shoe plate early so the damage doesn't spread to the swash plate and shoes.

Get a quote

Need the right part, fast?

Send your machine model and the part you need — we confirm fitment and quote.

  • Pump code / plate
  • Machine model
  • Photo of the old part