Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Shoe plate – Rexroth-Uchida A10V40

Uchida/Rexroth · A10V

Shoe plate – Rexroth-Uchida A10V40

New, correct codeOn requestA10V40

Quick answer

The A10V40 shoe plate holds the piston shoes flat against the swash plate in a Rexroth-Uchida A10V variable pump, so flow holds. A worn or loose plate causes leakage and a weak pump.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Shoe plate
Brand / pump line
Uchida/Rexroth · A10V
Model code
A10V40
Condition
New, correct code
Availability
On request

What the A10V40 shoe plate does

The shoe plate holds the piston shoes flat and even on the swash plate as the cylinder block turns, stopping them lifting through the part of each turn with no oil pressure behind them. Seated shoes let the pump draw and deliver steadily and hold its flow. The Rexroth-Uchida A10V40 suits the A10V variable-displacement axial piston pump — a small pump found on mini excavators and compact industrial or mobile hydraulic units.

Signs it needs replacing

A scored, pitted or cracked face, or slack shoe pockets, lets the shoes tilt: internal leakage rises, the pump goes weak, slow to build pressure and short on power under load, often with rattle and rising oil temperature. Inspect the shoe plate with the piston shoes and replace them as a set.

Choosing the right part

Under high pressure, surface hardness, flatness and correct shoe pockets drive service life. Việt Trung Hải is an authorized JIC Hydraulics distributor — the A10V40 shoe plate is machined by JIC to the code, in the specified material and surface hardness, and seats straight in the original pump. Fast quotes on the A10V40.

Frequently asked questions

Is the A10V40 shoe plate the swash plate?

No. It holds the piston shoes against the swash plate; the swash plate sets displacement.

Why does the pump weaken as the plate wears?

Lifting shoes leak oil internally, so the pump is slow to build pressure and loses flow under load.

Will a JIC A10V40 plate fit the pump I already have?

Yes. JIC machines it to the A10V40 code and fit tolerance, so it seats in the original pump as it is. Fast quote on request.

Get a quote

Request a quote: Shoe plate – Rexroth-Uchida A10V40

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides