Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Rotary group kit – Rexroth A10V45

Uchida/Rexroth · A10V

Rotary group kit – Rexroth A10V45

New, correct codeOn requestA10V45

Quick answer

The A10V45 rotary group is the rotating assembly (cylinder block, pistons, valve plate, drive shaft) inside a Rexroth-Uchida A10V variable-displacement piston pump used on mini excavators and small hydraulic equipment.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies groups built to the exact A10V45 code in alloy steel with correct surface treatment, plus genuine units, with fast quotes.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Uchida/Rexroth · A10V
Model code
A10V45
Condition
New, correct code
Availability
On request

The A10V45 rotary group is the rotating assembly inside a Rexroth-Uchida A10V series piston pump — cylinder block, pistons, valve plate, swash plate and drive shaft — the part that actually generates the pump's flow and pressure.

Which pump the A10V45 fits

The A10V45 code fits Rexroth (Rexroth-Uchida) A10V variable-displacement open-circuit pumps, common on mini excavators and smaller construction and industrial hydraulic equipment. The kit replaces to the original geometry, keeping piston stroke and swash-plate angle.

When to replace it

Gradual power loss, slow lift and slow swing, and no pressure under heavy load are the usual signs. You may also notice fast oil heating, unusual noise and vibration, or metal particles in the oil as the block, valve plate and pistons score and leak internally.

Choosing quality parts

Việt Trung Hải is an authorized JIC Hydraulics distributor, supplying rotary groups built to the exact A10V45 code — alloy steel, machining and surface treatment to the original spec, so they carry load and last. The set goes into a standard A10V45 housing with nothing to modify, and genuine units are available. Contact us to verify the code and get a fast quote.

Frequently asked questions

Which machine does the A10V45 rotary group fit?

The A10V45 rotary group fits Rexroth-Uchida A10V variable-displacement open-circuit pumps, used on mini excavators and small construction and industrial hydraulic equipment. VTH checks the code on the pump body to match the correct kit.

When should the A10V45 rotary group be replaced?

When the pump gradually weakens, lift and swing slow down, pressure drops under load, oil overheats, or you find noise, vibration or metal particles in the oil. These point to a worn block, valve plate and pistons leaking internally.

Will dirty oil ruin a new A10V45 group?

It will. Grit and metal fines score the valve plate and shoe faces quickly, so flush the tank, change the filters and check the return line when the group goes in. The JIC A10V45 group is made to the code with the correct surface hardness, but clean oil is what makes that last. Việt Trung Hải is an authorized JIC Hydraulics distributor and stocks genuine units too.

Get a quote

Request a quote: Rotary group kit – Rexroth A10V45

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides