
Valve plate – Rexroth A10V45
Quick answer
The Rexroth-Uchida A10V45 valve plate is the porting plate that seals against the cylinder block and times each piston's intake and discharge on the A10V variable pump used on mini and compact excavators.
Việt Trung Hải supplies A10V45 plates in genuine and JIC form, on code and right in the original housing, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Valve plate
- Brand / pump line
- Uchida/Rexroth · A10V
- Model code
- A10V45
- Condition
- New, correct code
- Availability
- On request
What the A10V45 valve plate does
The valve plate is the porting plate pressed against the cylinder block that times each piston's intake and discharge. On the Rexroth-Uchida A10V variable piston pump — part A10V45, used on mini and compact hydraulic excavators — it seals the boundary between the intake and discharge ports while the cylinder block rotates against its face.
Signs it needs replacing
Scoring, pitting or grooving on the sealing face lets high-pressure oil leak into the low-pressure side. The machine loses power under load, the boom lifts slowly, pressure is hard to build, oil heats up quickly and metal appears in the oil. A discolored or scorched plate should be replaced, not lapped.
Choosing the right part
Material, surface hardness and flatness after grinding decide how long a valve plate lasts. Việt Trung Hải, an authorized JIC Hydraulics distributor, stocks the A10V45 plate in genuine form and in JIC form. The JIC plate is machined to the correct code and interchange tolerances for the Rexroth-Uchida pump, so it drops into the original housing as it is. Contact us for a fast quote.
Frequently asked questions
Which pump and machine does the A10V45 valve plate fit?
The A10V45 valve plate fits the Rexroth-Uchida A10V variable piston pump, typically used on mini and compact hydraulic excavators. Send us your pump code and serial number and we will confirm the correct plate for your unit.
When should the valve plate be replaced instead of lapped?
When the sealing face is deeply scored, pitted, discolored or grooved and lets high-pressure oil leak across, replace it. Lapping only removes light marks; it cannot restore lost flatness or surface hardness.
How is a JIC valve plate different from no-name parts?
JIC valve plates use selected material, controlled surface hardness and precise flat grinding to hold pressure and resist friction, matched to the A10V45 code. No-name parts often use the wrong material or poor machining, scoring and leaking sooner.
Get a quote
Request a quote: Valve plate – Rexroth A10V45
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A10VRotary group kit – Rexroth A10V45A10V45On requestView · get a quote
Uchida/Rexroth · A10VRetainer plate – Rexroth-Uchida A10V45A10V45On requestView · get a quote
Uchida/Rexroth · A10VPiston – Rexroth A10V45A10V45On requestView · get a quote
Uchida/Rexroth · A10VBall guide – Rexroth-Uchida A10V45A10V45On requestView · get a quote
Uchida/Rexroth · A10VCylinder block – Rexroth A10V45A10V45On requestView · get a quote
Uchida/Rexroth · A10VRotary group kit – Rexroth A10V40A10V40On requestView · get a quote
Uchida/Rexroth · A10VRotary group kit – Rexroth A10V43A10V43On requestView · get a quote
Uchida/Rexroth · A10VRotary group kit – Rexroth A10V71A10V71On requestView · get a quoteTechnical handbook