Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851

Hydraulic system

Ball guide & port plate

Ball guide & port plate for the common construction-machinery hydraulic pump series.

Ball guide & port plate
Chi tiết · PartBall guide & port plate

Quick answer

Ball guide & port plate: what are they?

The ball guide and port plate are a pair of guides at the heart of the rotary group: the port plate rides on the ball guide's spherical face and swivels with it, keeping the shoe plate and the piston shoes tilted at the correct angle to the swash plate as the pump turns. When the ball face or port plate wears, the shoes contact unevenly, the pump gets noisy, and the shoes and swash plate wear fast.

  • Authorized JIC Hydraulics distributor
  • Nationwide delivery · HCMC warehouse
  • Wholesale and retail
  • Fitment confirmed before we quote

The ball guide and port plate are rarely named, yet they steer the whole shoe assembly. The ball guide is the spherical piece at the center of the rotary group; the port plate is the perforated guide plate that sits on that sphere and carries the shoe plate. Thanks to this pair, as the cylinder block spins the shoes are always presented to the swash plate at the right angle instead of cocking over.

Role and wear signs

Part Role When worn
Ball guide Provides the sphere the port plate swivels on Pitted face, shoes lose angle, rattling noise
Port plate Holds and guides the shoe plate and shoes Elongated holes, shoes tilt, fast swash wear

Because the ball guide and port plate wear quietly, some pumps get new shoes and swash plates several times and stay noisy simply because this pair was overlooked. Việt Trung Hải supplies the correct ball guide and port plate for K3V, A8VO and HPV, genuine parts, with full rotary groups too.

Hydraulic pump rotary group

Anatomy

Ball guide & port plate inside the rotary group

The parts inside a piston pump work together to build flow and pressure. Tap any part to explore it and look it up.

  1. Rotary group
  2. Cylinder block
  3. Piston
  4. Shoe plate
  5. Swash plate
  6. Valve plate
  7. Drive shaft
  8. Ball guide & port plate
  9. Regulator

Wear signs

When to replace the ball guide & port plate

  • Uneven piston-shoe contact
  • Unusual noise during rotation
  • Wear on the ball guide

Compatibility

Pump series we supply ball guide & port plate for

Pump / motor seriesMakerProducts
A10VUchida/Rexroth14 products
HPVKomatsu12 products
K3VKawasaki12 products
M2XKawasaki11 products
PSVKayaba (KYB)10 products
MSFKayaba (KYB)9 products
K5VKawasaki8 products
DNBKawasaki4 products
MAGKayaba (KYB)4 products
K3SPKawasaki2 products
K7VKawasaki2 products

Send the pump code or machine model and we'll confirm the exact fit before quoting.

More Ball guide & port plate codes (110)

Find it

Order the exact part

Pick whichever suits you — our team confirms fitment, then quotes.

  1. By part number

    Send the number stamped on the old part for the exact match.

  2. By machine model

    e.g. Komatsu PC200-8, Hitachi ZX200 — send the model to match.

  3. By pump / motor series

    e.g. K3V112, A8VO107 — when you know the pump code.

Request a quote

FAQ

Frequently asked questions

What do the ball guide and port plate do?

They guide and hold the shoe plate and piston shoes at the correct angle to the swash plate throughout each revolution. That keeps the shoes sliding evenly on the swash plate instead of bearing to one side.

The pump is still noisy after new shoes and swash plate — could this pair be the cause?

Very likely. If the ball guide is pitted or the port plate is elongated and left in, the new shoes are still steered off-angle, so the noise and fast wear continue. Inspect both when you overhaul.

What does a worn port plate do to the pump?

The guide holes open up so the shoes aren't held in position, contact the swash plate unevenly, rattle and wear irregularly. Over time it drags down the shoes and the swash-plate face with it.

Can the ball guide and port plate be replaced on their own?

They can, if only they are worn, but they usually go in with the shoes and shoe plate at overhaul so the guiding set matches. Choose by pump code, since the sphere and hole pattern differ between families.

Get a quote

Need the right part, fast?

Send your machine model and the part you need — we confirm fitment and quote.

  • Pump code / plate
  • Machine model
  • Photo of the old part