Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Retainer plate – Komatsu KPV90

Komatsu

Retainer plate – Komatsu KPV90

New, correct codeOn requestKPV90

Quick answer

The Komatsu KPV90 port plate works with the ball guide to hold the piston shoes against the swash plate in the main pump, used on ~20-tonne PC200-class Komatsu excavators.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies genuine and JIC KPV90 plates cut to the same tolerances, so they run at the right clearance in the original pump.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Ball guide & port plate
Brand / pump line
Komatsu
Model code
KPV90
Condition
New, correct code
Availability
On request

Komatsu KPV90 port plate — which pump it fits

The port plate works with the ball guide to hold the piston shoes at the correct angle against the swash plate as the pump rotates. KPV90 is the Komatsu main (axial-piston) pump on ~20-tonne PC200-class excavators (PC200-2/-3/-5). Port plate and ball guide mate as a set — wear on one lets the whole assembly lose grip on the shoes.

When to replace

Worn shoe pockets or a scored, pitted plate let the shoes lift off the swash plate: weak pump output, slow lift and swing, knocking inside the pump, fast-heating oil, metal fines. Replace the ball guide and port plate together.

Genuine-quality parts

Under constant load and friction, material, surface hardness and flatness decide service life. Việt Trung Hải sells the KPV90 port plate genuine and, as an authorized JIC Hydraulics distributor, from JIC. The JIC ball guide and plate are cut to the same tolerance set, so the shoes stay at the right angle and the clearance stays where a new pump had it. Contact us for a fast quote.

Frequently asked questions

Which excavator does the KPV90 port plate fit?

KPV90 is the Komatsu main pump on ~20-tonne PC200-class excavators (PC200-2/-3/-5). The port plate and ball guide sit in the pump's piston assembly, holding the shoes against the swash plate. Share your pump code and machine model when enquiring.

When should I replace the port plate and ball guide?

Signs include weak pump output, slow lift and swing, knocking inside the pump, fast-heating oil or metal fines. A pitted or scored plate and loose shoe pockets mean you should replace the ball guide and port plate together.

Should I change the KPV90 plate on its own or the whole ball guide set?

The plate and the ball guide wear together, so with the pump already open, changing the pair is the safer call and puts the clearance back where it started. Fitting one alone makes sense only if the other face still checks out flat and unpitted. Việt Trung Hải sells them singly or as a set, genuine or JIC, all to the KPV90 code.

Get a quote

Request a quote: Retainer plate – Komatsu KPV90

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides