
Retainer plate – Komatsu HPV55
Quick answer
The Komatsu HPV55 port plate is the perforated retainer in the ball guide assembly that holds the piston shoes at the correct angle against the swash plate in the main pump of ~13-ton Komatsu excavators (such as the PC120).
Việt Trung Hải supplies genuine parts and JIC parts — same code, same fit tolerances, straight into the original housing — with fast quotes.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Ball guide & port plate
- Brand / pump line
- Komatsu · HPV
- Model code
- HPV55
- Condition
- New, correct code
- Availability
- On request
Komatsu HPV55 port plate — pump and machine fit
The Komatsu HPV55 port plate is the perforated retainer that works with the ball guide inside the main hydraulic pump. Together they steer and hold the piston shoes at the correct angle against the swash plate through the pump's rotation, so the pistons draw and deliver oil steadily. It fits the HPV55 main pump on Komatsu excavators in the ~13-ton class, typically the PC120.
When to replace
Worn or scored holes let the shoes go loose and tilt, breaking even contact with the swash plate. Expect a weak pump, slow digging, sluggish lift under load, knocking, vibration, and metal debris in the oil. Left too long, a shoe can pull free and wreck the whole pump.
Choosing quality parts
Match part HPV55 exactly — a flat plate with correctly located holes holds the shoes securely. Việt Trung Hải stocks genuine Komatsu parts and JIC Hydraulics parts; as JIC's authorized distributor we supply plates cut to the same code and the same fit tolerances, so they go straight into the original pump housing at the right clearance, with no lapping needed. Contact us for a fast quote.
Frequently asked questions
Which excavators use the HPV55 port plate?
It sits in the ball guide of the HPV55 main pump, fitted to Komatsu excavators around the 13-ton class, typically the PC120. Confirm your pump code and machine year before ordering so the part fits correctly.
When should the port plate be replaced?
Replace it when the holes wear or score and the shoes go loose, causing a weak pump, slow digging, knocking, and metal debris in the oil. Renew the ball guide and port plate together for reliable pump operation.
Does a JIC port plate need lapping before it goes into the original HPV55 housing?
No. Việt Trung Hải is an authorized JIC Hydraulics distributor, and the JIC plate is machined to the HPV55 code and the same fit tolerances, so it sits at the correct running clearance in the original housing. Clean the seat, line the plate up on its dowel and torque it down evenly — no reaming, no lapping.
Get a quote
Request a quote: Retainer plate – Komatsu HPV55
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Komatsu · HPVRotary group kit – Komatsu HPV55HPV55On requestView · get a quote
Komatsu · HPVRear drive shaft – Komatsu HPV55HPV55On requestView · get a quote
Komatsu · HPVFront drive shaft – Komatsu HPV55HPV55On requestView · get a quote
Komatsu · HPVSwash plate – Komatsu HPV55HPV55On requestView · get a quote
Komatsu · HPVShoe plate – Komatsu HPV55 (rear)HPV55On requestView · get a quote
Komatsu · HPVShoe plate – Komatsu HPV55 (front)HPV55On requestView · get a quote
Komatsu · HPVValve plate – Komatsu HPV55HPV55On requestView · get a quote
Komatsu · HPVPiston – Komatsu HPV55HPV55On requestView · get a quoteTechnical handbook