Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Rear drive shaft – Komatsu HPV55

Komatsu · HPV

Rear drive shaft – Komatsu HPV55

New, correct codeOn requestHPV55

Quick answer

The Komatsu HPV55 rear drive shaft carries torque to the second section of the tandem pump, turning its rotary group; the HPV55 main pump powers ~13-tonne excavators such as the Komatsu PC120.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies HPV55 shafts in genuine and JIC on the correct code, front or rear, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Drive shaft
Brand / pump line
Komatsu · HPV
Model code
HPV55
Condition
New, correct code
Availability
On request

Where the HPV55 rear shaft sits

The rear drive shaft belongs to the second pump section of the Komatsu HPV55 tandem pump. The front shaft takes drive directly from the engine; the rear shaft carries torque on to the rear cylinder block to turn the second rotary group. The HPV55 main pump powers ~13-tonne Komatsu crawler excavators such as the PC120 class. Correct rear position and a clean spline fit to the block keep the tandem running smoothly.

When to replace

Worn or rounded splines cause backlash and a knocking noise under load. A bent, cracked or twisted shaft, a weak rear pump section, or metal particles at the coupling all mean it is time to inspect and replace.

Choosing quality

As an authorized JIC Hydraulics distributor, Việt Trung Hải supplies HPV55 shafts on the JIC code: hardened spline area, machining tolerances that seat straight into the rear block, and long service under continuous running. Genuine Komatsu shafts are stocked as well. Right part, right front or rear. Contact us for a fast quote.

Frequently asked questions

How is the HPV55 rear shaft different from the front one?

The front shaft takes drive directly from the engine, while the rear shaft sits in the second section of the tandem pump and passes torque to the rear block. State front or rear when ordering to get the correct part.

Which excavator uses the HPV55 pump?

The Komatsu HPV55 main pump is used on ~13-tonne Komatsu crawler excavators, typically the PC120 series. This rear drive shaft sits inside that pump assembly and drives its second section.

Do you have the HPV55 shaft in stock?

Yes. Việt Trung Hải is an authorized JIC Hydraulics distributor holding HPV55 shafts on the JIC code alongside genuine Komatsu parts. Contact us to check stock and get a fast quote for the front or rear shaft.

Get a quote

Request a quote: Rear drive shaft – Komatsu HPV55

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides