Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Shoe plate – Komatsu HPV55 (front)

Komatsu · HPV

Shoe plate – Komatsu HPV55 (front)

New, correct codeOn requestHPV55

Quick answer

The HPV55 front shoe plate holds the piston shoes flat against the swash plate in the front section of Komatsu's tandem HPV55 main pump (PC120-class, ~13 t), keeping them seated and evenly loaded.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Shoe plate
Brand / pump line
Komatsu · HPV
Model code
HPV55
Condition
New, correct code
Availability
On request

The HPV55 front shoe plate and its place

In Komatsu's tandem HPV55 main pump, the front shoe plate is the retainer for the front pump section. It holds the piston shoes flat against the swash plate as the cylinder block rotates, so the shoes stay seated and share the load evenly through each stroke. HPV55 is the axial-piston pump on roughly 13-tonne excavators, typically the Komatsu PC120 class. It holds the shoes — not the swash plate — and does not set displacement.

Signs of trouble

When the front plate wears, cracks or slackens, the shoes tilt and lift off the swash plate and lose the oil-film seal. Flow builds slowly, the pump is weak, control jerks, power drops in hard digging, internal leakage rises and the oil runs hot with metal debris. Lifting shoes eventually damage the swash plate.

Choosing the right part

Order the correct HPV55 front code; the plate must be flat, hard and hold the shoes evenly to keep pressure and flow. Việt Trung Hải distributes JIC Hydraulics under authorization: the JIC plate is cut to the code and sits where it should in the original housing; genuine Komatsu is always on hand. Fast quote.

Frequently asked questions

Is the HPV55 front shoe plate the swash plate?

No. The shoe plate holds the piston shoes down onto the swash plate; the swash plate is the separate angled plate that sets displacement.

Signs the HPV55 front shoe plate is worn?

Slow load build-up, a weak pump, jerky control, internal leakage, hot oil and metal debris — from lifting shoes.

Which machine uses the HPV55?

The Komatsu HPV55 main pump on ~13-tonne excavators such as the PC120.

Get a quote

Request a quote: Shoe plate – Komatsu HPV55 (front)

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides