Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851

Technical handbook

Knowledge and experience in heavy-equipment parts

Technical know-how and hands-on experience with hydraulic pumps, rotary groups, seals and filters — and how to choose the right part by machine line and model year. Written by the Việt Trung Hải technical team.

All articles

129 articles · Page 1/11

Two hydraulic piston pumps, one yellow and one red tandem unit, seen from the shaft end
Diagnosis & repair

Excavator sluggish when cold: 5 causes and fixes

Excavator sluggish when cold behavior almost always traces back to hydraulic oil that has thickened in the cold, not to a failing pump. Cold oil is high in viscosity, so the pump cannot draw enough to build full flow while the pump control and pilot valves respond slowly. Once the oil warms into its working range, the machine feels light again.

Nguyễn Văn Hùng15 min
Excavator undercarriage parts: track chains, sprockets, rollers, idlers, track-tension springs, a bucket and bucket teethChoosing the right part

How to Choose Excavator Bucket Teeth That Last

A field guide to choosing excavator bucket teeth by machine system, ground type, and pinning so they last and do not drop mid-shift.

Đỗ Thị Hương12 min
Excavator undercarriage parts: track chains, sprockets, rollers, idlers, track-tension springs, a bucket and bucket teethUnderstanding machines & systems

Hydraulic work attachments on excavators: 6 common types

The six common hydraulic work attachments on excavators — bucket, breaker, grapple, shear, auger, quick coupler — and the oil line, valve and flow each needs to run right.

Phạm Đức Thắng20 min
Excavator classes: 4 size groups and their real usesUnderstanding machines & systems

Excavator classes: 4 size groups and their real uses

Excavator classes broken into four size groups — mini, midi, the standard 20-ton class and large machines — by real-world role, and how size shifts the hydraulics and wear parts.

Phạm Đức Thắng15 min
An assortment of oil seals, cylinder seals and O-rings in several sizes, in black, blue, orange and yellowDiagnosis & repair

Bent hydraulic cylinder rod: 4 causes and how to check

A bent rod presses the seal lip off-centre and scores the tube, so oil weeps again right after a reseal. Four causes, the failure mechanism, and three ways to check straightness before you touch the seal kit.

Nguyễn Văn Hùng14 min
A disassembled JIC hydraulic rotary group: cylinder block, pistons, shoe plate, valve plate, pump shafts and JIC boxesChoosing the right part

Spotting counterfeit parts: 7 ways to tell genuine from fake

Seven ways to tell genuine from fake right at the counter: label, stamped code, machining, weight, seal, box code and traceability, plus why fakes always show up in the material.

Đỗ Thị Hương15 min