Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851

Topic

Maintenance & uptime

Service intervals, oils and prevention that keep the hydraulic system healthy.

Articles in this topic (19)

Excavator friction discs, steel plates and slewing ring gearsMaintenance & uptime

Travel motor maintenance on excavators: 6 routine jobs

Six final-drive jobs for excavators: change the gear oil, read the drained oil (metal glitter, milky, burnt smell), check the face seal, listen for bearings, test the parking brake, and set track tension — plus where JIC parts and ZVL bearings fit in a rebuild.

Lê Minh Tuấn13 min
An assortment of oil seals, cylinder seals and O-rings in several sizes, in black, blue, orange and yellowMaintenance & uptime

Finding hydraulic leaks: a guide to 6 common leak points

A walk-around method to locate the 6 most common hydraulic leak points - rods, fittings, pump shaft seal, swivel joint, travel motors and cooler - plus how to tell an external weep from internal bypass.

Lê Minh Tuấn15 min
Excavator undercarriage parts: track chains, sprockets, rollers, idlers, track-tension springs, a bucket and bucket teethMaintenance & uptime

How to Grease an Excavator Right: 5 Points and Timing

A field guide to greasing an excavator point by point, pumping grease correctly and setting a sensible schedule so pins and bushings do not wear out fast.

Lê Minh Tuấn12 min
Excavator undercarriage parts: track chains, sprockets, rollers, idlers, track-tension springs, a bucket and bucket teethMaintenance & uptime

Rainy season excavator care: 12 things to do right

How to keep an excavator running well through the rainy season: keep water out of the oil, stop rod rust, keep the electrics dry and grease more often.

Lê Minh Tuấn12 min
Excavator undercarriage parts: track chains, sprockets, rollers, idlers, track-tension springs, a bucket and bucket teethMaintenance & uptime

How to Tension Excavator Tracks the Right Way

A field guide to tensioning excavator tracks: spot a loose or tight track, pump and bleed the adjuster, measure sag, and avoid throwing a track.

Lê Minh Tuấn12 min
A group of construction-machinery filters: air, oil, fuel and hydraulic filter elements side by sideMaintenance & uptime

Hydraulic oil change interval: when to change it?

How to set the hydraulic oil change interval by run hours and working conditions, with the warning signs and tips to keep the pump alive.

Lê Minh Tuấn12 min