Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851

Hydraulic system

Swing motor

Complete swing motor and replacement parts for construction machinery.

Swing motor
Chi tiết · PartSwing motor

Quick answer

Swing motor: what is it?

A swing motor is the hydraulic motor that rotates the upper body and cab of the excavator around the swing axis. As it weakens, the slew turns slow and weak, the upper body drifts or kicks back when stopping, and there's a clunk as rotation starts. Việt Trung Hải supplies genuine and high-quality replacement swing motors matched to the exact machine model.

  • Authorized JIC Hydraulics distributor
  • Nationwide delivery · HCMC warehouse
  • Wholesale and retail
  • Fitment confirmed before we quote

A swing motor mounts on the swing gearbox, its pinion meshing into the slew-ring bearing to turn the upper body left and right. This is a motor, not a pump; inside is a piston rotary group plus a brake valve and anti-kickback valve that hold the house still when you release the lever. Worn parts or a loose valve make the slew weak and hard to control.

Signs your swing motor is failing:

  • Slew is slow and weak, with a heavy take-off when rotating under load.
  • The upper body coasts an extra bit or kicks back the moment you release the lever.
  • Parked on a slope, the house drifts because the brake valve can't hold.
  • A clunk or knock at the swing base every time rotation starts.
  • Oil leaks at the motor shaft seal or the joint to the swing gearbox.

Depending on wear, we fit a JIC rotary group with a refreshed brake valve, or swap the whole swing motor when the housing and shaft are worn out. Tell us the brand, model and whether the motor or the swing gearbox failed so we pull the right part; Việt Trung Hải keeps genuine and high-quality replacement stock in HCMC.

Wear signs

When to replace the swing motor

  • Slow or weak slew
  • Upper body drifts when stopped
  • Noise while rotating
  • Oil leak at the swing motor

Technical handbook

Related guides

Find it

Order the exact part

Pick whichever suits you — our team confirms fitment, then quotes.

  1. By part number

    Send the number stamped on the old part for the exact match.

  2. By machine model

    e.g. Komatsu PC200-8, Hitachi ZX200 — send the model to match.

  3. By pump / motor series

    e.g. K3V112, A8VO107 — when you know the pump code.

Request a quote

FAQ

Frequently asked questions

Does the house drifting when stopped mean the swing motor is bad?

Drift on lever release usually comes from a worn brake or anti-kickback valve inside the swing motor. Sometimes it's the relief valve setting, so measure pressure before concluding the motor must be replaced.

Can a swing motor be rebuilt, or must it be replaced?

Light rotary-group wear is fixed with a JIC rotary group and a refreshed brake valve. If the shaft bushings are worn, the housing is cracked, or the swing gearbox teeth are broken, a full replacement lasts longer.

What causes a clunk at the swing base when rotating?

A clunk as rotation starts can be backlash between the pinion and slew ring, but also a valve inside the motor acting late. Check both the swing motor and the slew-ring bearing.

What's needed to order a swing motor, and does it include the gearbox?

Send the brand, model and the code on the motor housing. We sell the hydraulic motor alone or the complete unit with the swing gearbox; tell us whether the motor or the gearbox failed so we quote the right part.

Get a quote

Need the right part, fast?

Send your machine model and the part you need — we confirm fitment and quote.

  • Pump code / plate
  • Machine model
  • Photo of the old part