Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Swing motor rotary group – Kayaba MSF52P

Kayaba (KYB) · MSF

Swing motor rotary group – Kayaba MSF52P

New, correct codeOn requestMSF52P

Quick answer

The Kayaba MSF52P rotary group is the rotating core inside a Kayaba (KYB) swing motor — cylinder block, pistons, valve plate and shaft — that swings the upper body of small crawler excavators.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies JIC MSF52P rotary groups built to code, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Swing motor
Brand / pump line
Kayaba (KYB) · MSF
Model code
MSF52P
Condition
New, correct code
Availability
On request

The MSF52P rotary group is the rotating core inside a Kayaba (KYB) swing motor — cylinder block, pistons, valve plate and drive shaft. It carries the load and does the wearing, turning the excavator's upper body around the undercarriage. MSF is Kayaba's swing-motor line; the MSF52P sits at the small-class end and fits small crawler excavators.

Signs it needs replacing: weak or slow swing, drift and poor hold when parked on a slope, a metallic knock or squeal at start and stop, fast heat build-up and internal leakage from a scored block or worn valve plate.

Việt Trung Hải is an authorized JIC Hydraulics distributor. We supply JIC MSF52P rotary groups built to code — correct material and heat treatment, tight machined clearances that hold pressure and hold swing. In stock, matched to your motor, with a fast quote.

Frequently asked questions

Which motor and machine does the MSF52P rotary group fit?

The MSF52P is the rotary group for a Kayaba (KYB) MSF-series swing motor, used on small crawler excavators. Send your motor number or machine model and Việt Trung Hải will match the exact code before quoting so it fits.

When should I replace the whole rotary group instead of single parts?

When swing is weak, drifts on a slope, knocks metallically, or the motor overheats and leaks internally, the block, pistons and valve plate are usually worn together. Replacing the full rotary group keeps clearances even and lasts longer than piecemeal repair.

Does a JIC rotary group need adjusting to fit the original MSF52P housing?

No. Việt Trung Hải is an authorized JIC Hydraulics distributor; the kit is made to the MSF52P code, with clearances and heat treatment on spec, so it holds pressure and holds swing as fitted under continuous work.

Get a quote

Request a quote: Swing motor rotary group – Kayaba MSF52P

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides