Hydraulic system
Hydraulic filter
Hydraulic filter for construction machinery — return, suction and pilot filters.

Quick answer
Hydraulic filter: what is it?
Hydraulic filters keep the hydraulic oil clean, trapping metal particles and grit before they reach the pump, motors and control valves. Excavators usually run a return filter, a suction filter and a pilot filter, each in a different place in the oil circuit. Viet Trung Hai supplies filters by machine model, thread and rating, shipping from our Ho Chi Minh City warehouse nationwide.
- 25+ years in construction-machinery parts
- Nationwide delivery · HCMC warehouse
- Wholesale and retail
- Fitment confirmed before we quote
Dirty hydraulic oil is the number-one enemy of pumps and valves: fine metal particles are enough to scratch surfaces, jam valve spools and drop performance. Hydraulic filters trap those particles, so changing filters on time is far cheaper than rebuilding a pump. Viet Trung Hai helps you pick the right filter for each point in the circuit.
Filter types on construction machines:
- Return filter: cleans oil on its way back to tank, keeping circulating oil clean.
- Suction filter: sits before the pump inlet, stopping coarse debris from the tank.
- Pilot filter: cleans the control oil for valves and joysticks, where high cleanliness matters.
- Pressure line filter: protects the valve bank downstream of the pump.
- Tank breather: stops airborne dust entering the reservoir.
When ordering, give the machine model or match the thread and port on the old filter; that way you get the right type and rating without guessing. In stock in genuine and high-quality replacement grades for Komatsu, Hitachi, Kobelco, Doosan, Hyundai and Cat.
Related part groups
All hydraulic-pump partsTechnical handbook
Related guides
Find it
Order the exact part
Pick whichever suits you — our team confirms fitment, then quotes.
By part number
Send the number stamped on the old part for the exact match.
By machine model
e.g. Komatsu PC200-8, Hitachi ZX200 — send the model to match.
Send a photo of the old part
Photograph the old part and the machine's spec plate — our team matches it before quoting.
FAQ
Frequently asked questions
When should I change a hydraulic filter?
Follow the machine's service schedule, and change sooner in dusty or muddy work, or right after a pump or motor failure to clear metal debris from the oil.
What are the signs of a clogged hydraulic filter?
Weak power, oil heating up fast, a warning lamp, or the bypass valve opening so oil skips the filter — at that point dirty oil goes straight into the pump and valves.
How do I pick a filter without the code?
By machine model, and by matching the thread, port size and mounting of the old filter so you get the right type and rating.
How do return and suction filters differ?
The suction filter sits before the pump inlet to stop coarse debris, while the return filter cleans oil going back to tank at a finer level; the two are not interchangeable.
Get a quote
Need the right part, fast?
Send your machine model and the part you need — we confirm fitment and quote.
- Pump code / plate
- Machine model
- Photo of the old part