Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Swing motor rotary group – Kawasaki M2X55

Kawasaki · M2X

Swing motor rotary group – Kawasaki M2X55

New, correct codeOn requestM2X55

Quick answer

The Kawasaki M2X55 rotary group is the rotating core (block, pistons, shoes, valve plate) inside the swing motor that turns the upper body of a small-to-mid excavator.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies JIC M2X55 rotary groups made to the code that assemble into the standard housing without lapping, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Swing motor
Brand / pump line
Kawasaki · M2X
Model code
M2X55
SKU
2021-35814
Condition
New, correct code
Availability
On request

Kawasaki M2X55 swing motor rotary group

The rotary group is the rotating core inside the motor — cylinder block, pistons, shoes and valve plate — that turns hydraulic flow into swing torque, rotating the upper body around the undercarriage. This kit fits the Kawasaki M2X swing motor, model M2X55, used on roughly 12–14 ton excavators such as the Kobelco SK120 and Kato HD513.

When to replace

Weak, slow, low-torque swing is the first sign. As the valve plate and shoes score and internal leakage grows, the house drifts on a slope, jerks at start and stop, whines, and the motor runs hot. Dirty oil speeds up block scoring.

Genuine-quality parts

Swing internals run at high pressure with tight clearances, so material, machining and heat treatment decide sealing and torque life. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies JIC rotary groups made to the M2X55 code — shoes and valve plate cut to tolerance, so nothing needs lapping on assembly. Contact us for a fast quote.

Frequently asked questions

Which excavators use the M2X55?

The M2X55 is a Kawasaki M2X-series swing motor, typically fitted to small-to-mid excavators. Send us your motor code and machine model so Việt Trung Hải can match the exact rotary group before quoting.

When should the swing motor rotary group be replaced?

Replace it when swing is weak or jerky, the house drifts on a slope, or you hear whining and the motor overheats — signs the internal group is worn and scored. A new rotary group restores swing power without replacing the whole motor.

Why does a freshly fitted M2X55 group fail early?

Usually dirty oil and metal debris left in the lines from the previous failure. Before fitting a JIC group made to the M2X55 code, drain the oil, change the return filter, flush the swing circuit and check the shaft seal. Do that and the shoe-to-valve-plate clearance stays where it should.

Get a quote

Request a quote: Swing motor rotary group – Kawasaki M2X55

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides