
Drive shaft – Kawasaki M2X146
Quick answer
The Kawasaki M2X146 drive shaft is the swing-motor shaft on ~30-tonne class excavators, sending torque through its splines to the gearbox that slews the machine.
Việt Trung Hải, an authorized JIC Hydraulics distributor, carries the M2X146 as a genuine part and as a JIC part, cut to the right spline count for a drop-in fit, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Drive shaft
- Brand / pump line
- Kawasaki · M2X
- Model code
- M2X146
- SKU
- 2021-590-1-6
- Condition
- New, correct code
- Availability
- On request
Kawasaki M2X146 drive shaft — what it fits
The drive shaft carries torque into the cylinder block to spin the rotary group. In the Kawasaki M2X146 swing motor — the slew motor used on ~30-tonne class excavators — it passes torque through its splines to the swing gearbox that rotates the upperstructure. It sees torsional load on every slew, so spline and journal condition set the life of the whole unit.
When to replace
Worn or loose splines make the swing jerk, lag, or knock on reversal. A scored journal at the seal lets oil weep from the motor end. A bent, twisted, or cracked shaft means replace now, before it damages bushings and the block.
Choosing quality
A good shaft matches the M2X146 code, spline count, and journal diameter for a tight, sealed fit. Việt Trung Hải, an authorized JIC Hydraulics distributor, carries the M2X146 as a genuine part and as a JIC part. The JIC shaft is alloy steel, heat treated and machined to the fitting tolerance, so it meshes with the original block and swing gearbox as it comes out of the box. Contact us for a fast quote.
Frequently asked questions
Which machine does the M2X146 drive shaft fit?
M2X146 is a Kawasaki swing motor used on roughly 30-tonne class excavators. The shaft is the drive shaft inside that motor, carrying torque from the rotary group through its splines to the swing gearbox that rotates the machine.
How do I know the M2X146 shaft needs replacing?
Jerky, laggy, or knocking swing on reversal usually points to worn or loose splines. Oil weeping at the motor end shows a scored seal journal. A bent, twisted, or cracked shaft should be replaced immediately.
What details do you need to order an M2X146 shaft?
Send the M2X146 motor code, the spline count at each end, and the journal diameter — that is enough to match it. Việt Trung Hải, an authorized JIC Hydraulics distributor, carries the M2X146 as a genuine part and as a JIC part, and quotes fast.
Get a quote
Request a quote: Drive shaft – Kawasaki M2X146
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · M2XSwing motor rotary group – Kawasaki M2X146M2X146On requestView · get a quote
Kawasaki · M2XRetainer plate – Kawasaki M2X146M2X146On requestView · get a quote
Kawasaki · M2XFriction lining – Kawasaki M2X146M2X146On requestView · get a quote
Kawasaki · M2XValve plate – Kawasaki M2X146M2X146On requestView · get a quote
Kawasaki · M2XPin – Kawasaki M2X146M2X146On requestView · get a quote
Kawasaki · M2XWasher – Kawasaki M2X146M2X146On requestView · get a quote
Kawasaki · M2XSteel ring – Kawasaki M2X146M2X146On requestView · get a quote
Kawasaki · M2XCylinder block – Kawasaki M2X146M2X146On requestView · get a quoteTechnical handbook