Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Pin – Kawasaki M2X146

Kawasaki · M2X

Pin – Kawasaki M2X146

New, correct codeOn requestM2X146

Quick answer

The M2X146 rotary group is the rotating piston assembly inside the Kawasaki M2X146 swing motor, used on ~20-tonne excavators such as the Kobelco SK200.

Việt Trung Hải supplies it genuine and from JIC, correct to code and cut to interchange tolerances for a direct fit, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Kawasaki · M2X
Model code
M2X146
SKU
2021-590-1-161
Condition
New, correct code
Availability
On request

What the M2X146 rotary group fits

The M2X146 rotary group is the rotating core inside the Kawasaki M2X146 swing motor — cylinder block, pistons, valve plate and shaft — the assembly that turns pressurized oil into swing torque. It sets how strongly and smoothly the machine slews.

The M2X146 is a common swing motor on ~20-tonne excavators, typically the Kobelco SK200 family. A worn rotary group saps swing power even when the main pump is fine.

Signs it needs replacing

Weak or slow swing under load, jerky motion, metallic noise, internal leakage and overheating, or a scored valve plate and worn pistons on teardown — all point to a worn rotary group.

Genuine-quality parts, fast quote

Material, heat treatment and machining precision decide service life here. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies M2X146 rotary groups from the motor maker and from JIC, each to code and cut to interchange tolerances, so the set goes into the original housing as it comes. Contact us for a fast quote.

Frequently asked questions

Which excavators use the M2X146 rotary group?

The M2X146 is a swing motor for roughly 20-tonne excavators, most commonly the Kobelco SK200 family and similar machines. Send us the motor number and machine year so Việt Trung Hải can confirm the exact rotary-group code before quoting.

Should I replace the whole rotary group or single parts?

When the block, pistons and valve plate are worn or scored together, fitting a complete rotary group restores swing power and lasts better than piecemeal repair. If only one part is lightly damaged, Việt Trung Hải will point you at that part rather than the whole assembly.

Does a JIC rotary group need the valve plate lapped when it goes into an M2X146?

No. JIC rotary groups are built to the correct code and to interchange tolerances, with the valve plate, block and pistons matched as a set, so the assembly runs right in the original housing. Việt Trung Hải distributes JIC Hydraulics and also stocks genuine parts, with a fast quote.

Get a quote

Request a quote: Pin – Kawasaki M2X146

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides