Motor · Kawasaki
M2X hydraulic motor parts
M2X motors and replacement parts — Kawasaki.

- Series
- M2X
- Type
- Hydraulic motor
- Maker
- Kawasaki
Quick answer
What is M2X?
M2X is a Kawasaki swing motor that rotates the excavator's upper body relative to the undercarriage. When an M2X weakens, the machine slews slowly, unevenly, or drifts when stopping — signs the motor's rotary parts or swing brake are worn. Việt Trung Hải supplies rotary assemblies, brakes, seals and high-quality replacement parts for the M2X motor.
- Authorized JIC Hydraulics distributor
- Nationwide delivery · HCMC warehouse
- Kawasaki · motor
- Fitment confirmed before we quote
M2X is a Kawasaki swing motor, mounted on top of the swing gearbox to rotate the excavator's entire upper body. It is a motor, not a pump — it takes oil from the main pump and turns it into slewing force. Because it cycles constantly through dig-and-dump work, the M2X is a part that commonly wears.
Signs an M2X motor needs checking:
- Slow or weak slewing, especially under load
- Upper body drifts and won't stop cleanly
- Jerking or noise when rotation starts
- Unusual heat at the motor unit
- Oil leaks around the shaft and seals
Inside, the M2X has a cylinder block, pistons, shoe plate, valve plate, motor shaft and a swing brake. As these wear, the motor loses power and produces the symptoms above. Việt Trung Hải supplies rotary assemblies, swing brakes, seal kits and high-quality individual replacement parts for M2X; common rotary codes are also available as JIC parts that fit tight. Send the motor code and machine model so we pull the right set.
What it is
Is M2X a pump or a motor?
Pump
Builds the flow and pressure the system runs on.
K3V · K5V · A8VO · HPV
Motor
M2XTurns oil pressure into travel / swing motion.
M2X · M5X · MSF · MAG
M2X parts
View all 45 products
Kawasaki · M2XSwing motor rotary group – Kawasaki M2X120M2X120On requestView · get a quote
Kawasaki · M2XSwing motor rotary group – Kawasaki M2X146M2X146On requestView · get a quote
Kawasaki · M2XSwing motor rotary group – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XSwing motor rotary group – Kawasaki M2X170M2X170On requestView · get a quote
Kawasaki · M2XSwing motor rotary group – Kawasaki M2X210M2X210On requestView · get a quote
Kawasaki · M2XSwing motor rotary group – Kawasaki M2X55M2X55On requestView · get a quote
Kawasaki · M2XSwing motor rotary group – Kawasaki M2X96M2X96On requestView · get a quote
Kawasaki · M2XDrive shaft – Kawasaki M2X146M2X146On requestView · get a quoteFind it
Three ways to find the right part
Pick whichever suits you — our team confirms fitment, then quotes.
By pump / motor series
e.g. M2X — when you know the code to replace.
By machine model
e.g. Komatsu PC200-8, Hitachi ZX200 — send the model to match.
By part number
Send the number stamped on the old part for the exact match.
FAQ
Frequently asked questions
Is M2X a pump or a motor?
M2X is a Kawasaki swing motor, not a pump. It receives oil from the main pump and creates the rotational force that swings the excavator's upper body.
Why does the upper body slew slowly and drift?
Slow, weak slewing or drifting when stopping usually comes from a worn M2X rotary group or a failing swing brake. Check the piston clearances, shoe plate and brake condition before deciding on a repair.
What is inside an M2X motor?
The M2X contains a cylinder block, pistons, shoe plate, valve plate, motor shaft and a swing brake. These are the main wear parts and are usually replaced during a rebuild.
Does Việt Trung Hải stock M2X parts?
Yes, we supply rotary assemblies, swing brakes, seal kits and individual parts for M2X, including JIC parts for common codes. Send the motor code so we match the exact configuration.
Get a quote
Need the right part, fast?
Send your machine model and the part you need — we confirm fitment and quote.
- Pump code / plate
- Machine model
- Photo of the old part