Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Swing motor rotary group – Kawasaki M2X146

Kawasaki · M2X

Swing motor rotary group – Kawasaki M2X146

New, correct codeOn requestM2X146

Quick answer

The Kawasaki M2X146 rotary group is the internal rotating assembly of the M2X146 swing motor — cylinder block, pistons, valve plate and shaft — used on ~20-ton excavators such as Kobelco SK200/SK210, Hitachi EX200/ZX200 and Doosan DH220.

Việt Trung Hải supplies JIC rotary groups cut to the code, seating in the existing housing at the right clearance, with fast quotes.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Swing motor
Brand / pump line
Kawasaki · M2X
Model code
M2X146
SKU
2021-75076
Condition
New, correct code
Availability
On request

What the M2X146 swing-motor rotary group is

The rotary group is the internal rotating assembly of the Kawasaki M2X146 swing motor: cylinder block, pistons and piston shoes, valve plate, shaft and springs. The swing motor turns the excavator's upper body around the undercarriage, and this rotary group converts pressurised oil into swing torque. M2X146 is a common swing motor on ~20-ton excavators such as Kobelco SK200/SK210, Hitachi EX200/ZX200 and Doosan DH220.

Signs it needs replacing

Weak or slow swing under load, jerky starts and stops, whining or knocking inside the motor. A scored valve plate and worn block or shoes cause internal leakage, overheating and delayed response; metal particles in the oil mean the block is failing.

Choosing quality parts

JIC machines the rotary group to the M2X146 code — precise block and valve-plate work, durable surface treatment, the design clearance held — so the set works properly in the standard motor housing. Việt Trung Hải distributes the line; contact us for a fast quote.

Frequently asked questions

Which excavators use the M2X146 rotary group?

M2X146 is a common Kawasaki swing motor on ~20-ton excavators such as Kobelco SK200/SK210, Hitachi EX200/ZX200 and Doosan DH220. The JIC rotary group fits straight into the existing M2X146 motor housing on your machine.

When should I replace the rotary group instead of the whole motor?

If swing is weak, jerky or noisy from internal leakage but the motor housing is still sound, replacing the rotary group (block, pistons, valve plate) usually restores swing power at a lower cost than a complete motor.

Will a JIC group fit an older M2X146 motor?

It will, as long as the code matches. JIC machines the M2X146 to its own code and fitting tolerance, so block, pistons and valve plate seat in the housing already on the machine. Send the number stamped on the motor body and Việt Trung Hải checks it before shipping; genuine parts are available too.

Get a quote

Request a quote: Swing motor rotary group – Kawasaki M2X146

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides