Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Cylinder block – Kawasaki M2X146

Kawasaki · M2X

Cylinder block – Kawasaki M2X146

New, correct codeOn requestM2X146

Quick answer

The Kawasaki M2X146 cylinder block is the piston barrel inside the M2X146 swing motor, fitted to ~20-ton excavators such as the Kobelco SK200.

Việt Trung Hải keeps genuine Kawasaki and JIC Hydraulics blocks to the same code that fit the original housing directly, with a fast quote from your motor code and machine model.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Cylinder block
Brand / pump line
Kawasaki · M2X
Model code
M2X146
SKU
2021-590-1-254
Condition
New, correct code
Availability
On request

What the M2X146 cylinder block fits

The cylinder block is the barrel holding the piston bores that rotate around the drive shaft, where pistons reciprocate to move oil. Inside the Kawasaki M2X146 swing motor, it sets swing flow and torque. M2X146 is a mid-size swing motor used on roughly 20-ton excavators such as the Kobelco SK200.

When to replace

Worn or scored blocks cause weak, jerky swing, drift when parked on a slope, and oil heating with pressure loss from internal leakage past the valve-plate face. Knocking or swing that slows as the oil warms points to tapered piston bores.

Choosing quality parts

Việt Trung Hải supplies M2X146 cylinder blocks in genuine Kawasaki and JIC Hydraulics form — we distribute JIC under authorization. The JIC block is cut to the same code, with piston-to-bore clearance and valve face held to fitting tolerance, so it seals as soon as it goes into the original motor housing. Send your motor code and machine model for a fast quote.

Frequently asked questions

Which excavator does the M2X146 cylinder block fit?

M2X146 is a mid-size Kawasaki swing motor used on roughly 20-ton excavators such as the Kobelco SK200 and equivalents. Send your motor code and machine model so Việt Trung Hải can confirm the correct block before quoting.

How do I know the cylinder block is worn?

Weak or jerky swing, drift when parked on a slope, fast oil heating and knocking suggest a worn block or scored valve-plate face. Check the piston bores and contact face before deciding to replace it.

Do you stock the M2X146 block for the SK200?

Yes. As an authorized JIC Hydraulics distributor, Việt Trung Hải keeps M2X146 blocks in JIC and genuine Kawasaki form. The JIC block is made to the same code, with piston clearance and valve face to fitting tolerance, so it runs straight in the original motor housing. Send the motor code and we will check stock.

Get a quote

Request a quote: Cylinder block – Kawasaki M2X146

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides