Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Swing motor rotary group – Kawasaki M2X150

Kawasaki · M2X

Swing motor rotary group – Kawasaki M2X150

New, correct codeOn requestM2X150

Quick answer

The Kawasaki M2X150 rotary group is the moving core of a swing motor — cylinder block, pistons and valve plate — that sets swing power and sealing. It fits the Kawasaki M2X swing motor on mid-to-large excavators around the 20–30 ton class.

Việt Trung Hải supplies genuine and JIC parts, each to the M2X150 code and valve-plate clearance, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Swing motor
Brand / pump line
Kawasaki · M2X
Model code
M2X150
SKU
2021-93812
Condition
New, correct code
Availability
On request

Kawasaki M2X150 swing motor rotary group

The rotary group is the moving core of a swing motor — cylinder block, pistons, shoes and valve plate. The swing motor rotates an excavator's upper body around the undercarriage, and the rotary group turns high-pressure oil into swing torque. The Kawasaki M2X150 is an M2X-family swing motor for mid-to-large excavators around the 20–30 ton class, commonly Kobelco SK and Sumitomo SH machines.

Signs it needs replacing

Weak, slow or jerky swing points to a worn cylinder block and valve plate leaking internally. As wear grows, the upper body drifts on a slope, oil heats quickly, and knocking is heard as the swing starts.

Choosing quality

The rotary group sets the motor's sealing and service life, so material, heat treatment and valve-plate clearance must be right. Việt Trung Hải stocks M2X150 rotary groups in genuine and JIC form — same code, same tolerance, valve face lapped flat, so the set holds pressure in the housing already fitted. Contact us for a fast quote.

Frequently asked questions

Which excavators use the M2X150 rotary group?

The M2X150 is a Kawasaki swing motor for mid-to-large excavators around the 20–30 ton class, commonly Kobelco SK and Sumitomo SH machines. Send us your motor code and machine model so Việt Trung Hải can confirm the correct rotary group.

Should I replace the whole rotary group or just parts?

When the cylinder block, pistons and valve plate are worn together, fitting a complete rotary group restores sealing and steady swing power better than piecemeal repair. We advise based on your motor's actual condition.

The swing is still weak after a new M2X150 group — why?

Check the swing relief valve and pilot pressure first, since a fresh rotary group can only hold what the valves keep sealed. Then look at the swing brake and its friction plates. A JIC group cut to the M2X150 code restores the motor internals; valves and brake are a separate check.

Get a quote

Request a quote: Swing motor rotary group – Kawasaki M2X150

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides