Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Pin – Kawasaki M2X150

Kawasaki · M2X

Pin – Kawasaki M2X150

New, correct codeOn requestM2X150

Quick answer

The Kawasaki M2X150 rotary group is the rotating core inside the swing motor — cylinder block, pistons, valve plate and shaft — that turns high-pressure oil into slew torque, fitted on 20-ton class excavators like Kobelco SK200, Hyundai R210 and Doosan DH220. Việt Trung Hải carries genuine Kawasaki M2X150 groups and JIC sets as JIC's authorized distributor, each cut to the same code and dropping into the original motor housing. Fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Rotary group
Brand / pump line
Kawasaki · M2X
Model code
M2X150
SKU
2021-590-1-162
Condition
New, correct code
Availability
On request

Kawasaki M2X150 swing motor rotary group

The M2X150 is a Kawasaki swing (slew) motor used on 20-ton class excavators such as Kobelco SK200, Hyundai R210, Doosan DH220 and Sumitomo SH200. Its rotary group — cylinder block, pistons, valve plate and shaft — is the rotating core that turns high-pressure oil into torque to slew the upper structure, and it takes the heaviest wear in the motor.

Signs it needs replacing

Worn block and valve plate open clearances: weak swing, jerky rotation, drift on a slope, knocking and extra case drain. Scored pistons or a pitted plate mean lost pressure and slew force.

Choosing the right part

Match the M2X150 tail code to your machine. Việt Trung Hải carries genuine Kawasaki rotary groups and JIC Hydraulics rotary groups; as JIC's authorized distributor we ship the factory JIC set — block, pistons and valve plate cut to the same code and fitting tolerance, so it drops into the original motor housing with no reaming or lapping. Call VTH for the correct code and a fast quote.

Frequently asked questions

Which excavators use the Kawasaki M2X150 rotary group?

The M2X150 is a Kawasaki swing motor on 20-ton class excavators such as Kobelco SK200, Hyundai R210, Doosan DH220/DX220 and Sumitomo SH200. Tell us your machine year and the motor tail code so we match the exact rotary group.

When should I replace the whole M2X150 rotary group?

If swing is weak or jerky, the machine drifts on a slope, or you hear knocking with high heat and extra case drain, the block and valve plate are usually worn together. Replacing the full rotary group lasts longer than patching single parts.

Does a JIC rotary group need extra machining to fit an original M2X150 housing?

No. Việt Trung Hải is JIC Hydraulics' authorized distributor, and the JIC M2X150 rotary group is cut to the same code and fitting tolerance, so it goes straight into the original motor housing — no reaming, no lapping of the valve face. Clean the housing, check the shaft and torque it up as normal.

Get a quote

Request a quote: Pin – Kawasaki M2X150

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides