
Valve plate – Kawasaki M2X150
Quick answer
The Kawasaki M2X150 valve plate is the porting plate pressed against the cylinder block that times each piston's intake and discharge in the M2X150 swing motor, used on excavators around the 30-ton class.
Việt Trung Hải is an authorized JIC Hydraulics distributor supplying genuine and JIC plates to the correct code, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Valve plate
- Brand / pump line
- Kawasaki · M2X
- Model code
- M2X150
- SKU
- 2021-590-1-147
- Condition
- New, correct code
- Availability
- On request
What the M2X150 valve plate fits
The valve plate is the porting plate pressed against the cylinder block, timing each piston's intake and discharge. In the Kawasaki M2X150 swing motor it opens and closes the oil ports on cue so the upper structure swings smoothly and holds steady torque. The M2X150 belongs to Kawasaki's swing-motor family, typically fitted on crawler excavators around the 30-ton class.
Signs it needs replacing
Scoring, pitting or worn grooves on the face open the seal against the block and let oil leak internally. The swing then turns weakly, reverses slowly, judders and struggles to hold position on a slope, while the oil heats up faster. Inspect the valve plate together with the cylinder block and mating parts.
Choosing quality
A good valve plate must be flat, finely finished and made from wear-resistant, properly heat-treated material. As an authorized JIC Hydraulics distributor, Việt Trung Hải delivers the M2X150 plate from JIC to code: locating hole, ports and tolerances follow the original drawing, so it sits right in a standard motor. Genuine Kawasaki plates remain in stock. Contact us for a fast quote.
Frequently asked questions
Which pump or motor is the M2X150 valve plate for?
The M2X150 is a Kawasaki swing motor, usually fitted on crawler excavators around the 30-ton class. The valve plate sits against the cylinder block inside the motor and distributes high- and low-pressure oil so the swing runs smoothly and steadily.
How do I know the valve plate is worn?
When the face is scored, pitted or grooved, the swing motor tends to turn weakly, reverse slowly, judder and struggle to hold on a slope, and the oil heats up faster. Inspect the valve plate together with the cylinder block to judge it properly.
How do I identify the right valve plate for an M2X150 motor?
Read the code stamped on the motor housing, note the machine model and serial, and photograph both faces of the old plate so the porting can be compared. Việt Trung Hải, an authorized JIC Hydraulics distributor, matches it and ships the correct M2X150 code with a fast quote.
Get a quote
Request a quote: Valve plate – Kawasaki M2X150
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · M2XSwing motor rotary group – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XDrive shaft – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XShoe plate – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XRetainer plate – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XFriction lining – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XPin – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XBall guide – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XWasher – Kawasaki M2X150M2X150On requestView · get a quoteTechnical handbook