
Drive shaft – Kawasaki M2X150
Quick answer
The Kawasaki M2X150 drive shaft is the central splined shaft that transmits torque inside Kawasaki's M2X swing motor, used on medium-class excavators around the 20-ton range.
Việt Trung Hải sells genuine and JIC shafts, cut to code and sized to sit in the original housing at the right clearance, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Drive shaft
- Brand / pump line
- Kawasaki · M2X
- Model code
- M2X150
- SKU
- 2021-590-1-7
- Condition
- New, correct code
- Availability
- On request
Kawasaki M2X150 drive shaft — what it fits
The drive shaft is the central splined shaft that carries torque between the rotary group and the output inside a hydraulic unit. The M2X150 belongs to Kawasaki's swing-motor family, fitted to medium-class crawler excavators in the ~20-ton range. Every swing start, stop, and reversal loads this shaft in torsion.
When to replace
Watch for worn or backlashed splines, jerky swing or a knock on reversal, a scored seal journal that leaks, or a bent shaft causing vibration and heat. Replace the shaft with fresh seals and bushings to protect the cylinder block.
Getting the right part
Spline profile and journal tolerance must match exactly for a tight, play-free fit. Việt Trung Hải sells the Kawasaki M2X150 shaft as a JIC part and as a genuine part. The JIC shaft is JIC Hydraulics' own part, hardened and machined to the code, so it sits in the original motor housing at the right clearance with no reaming or shimming. Call VTH for advice and a fast quote.
Frequently asked questions
Which machines use the M2X150 drive shaft?
The M2X150 is a Kawasaki swing motor common on medium-class crawler excavators around the 20-ton range. The shaft transmits torque between the rotary group and the reduction gears. Send your machine model and serial so VTH can confirm the correct part and quote.
How do I tell if the shaft splines are worn?
Common signs are jerky swing, a knock on reversal, shaft backlash and vibration. Left too long, worn splines can damage the cylinder block. Replace the shaft together with its seals and bushings so everything fits tight.
Does a JIC M2X150 shaft need machining to fit the original motor housing?
No. The JIC M2X150 is cut to the code, with the correct spline profile and journal tolerance, so it meshes in the original housing at the right working clearance — no reaming, lapping or shimming. VTH ships the exact code and quotes fast.
Get a quote
Request a quote: Drive shaft – Kawasaki M2X150
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · M2XSwing motor rotary group – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XShoe plate – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XRetainer plate – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XFriction lining – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XValve plate – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XPin – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XBall guide – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XWasher – Kawasaki M2X150M2X150On requestView · get a quoteTechnical handbook