
Swing motor rotary group – Kawasaki M2X210
Quick answer
The Kawasaki M2X210 swing motor rotary group is the internal rotating kit (block, pistons, shoes, valve plate, shaft) that drives the swing, fitting M2X210 swing motors on large excavators.
Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies kits cut to the correct code that seat in the existing housing, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Swing motor
- Brand / pump line
- Kawasaki · M2X
- Model code
- M2X210
- SKU
- 2021-37828
- Condition
- New, correct code
- Availability
- On request
The Kawasaki M2X210 swing motor rotary group is the internal rotating kit — cylinder block, pistons, slipper shoes, valve plate and shaft — that generates the swing motor's torque. The swing motor turns an excavator's upper body around the undercarriage; this kit is where that power comes from. M2X is Kawasaki's swing motor line, and the M2X210 runs on large excavators, roughly the 30–45t class.
Weak or slow swing, jerking on start-up, knocking noise, swing drift on a slope, fast-heating oil or metal debris in the oil point to a scored block, worn valve plate or slipper shoes. When the housing is still sound, a new rotary group restores the motor.
As an authorized JIC Hydraulics distributor, Việt Trung Hải supplies M2X210 rotary groups cut to the correct code, material and tolerances, so the kit seats in the housing already on the machine at its working clearance. Contact us for a fast quote.
Frequently asked questions
Which excavators use the Kawasaki M2X210 swing motor rotary group?
M2X210 is a Kawasaki swing motor used on large excavators. If your machine runs an M2X210 swing motor, send the motor code and machine model so Việt Trung Hải can confirm the right rotary group before quoting.
When should I replace the rotary group instead of the whole swing motor?
If the swing is weak or jerky, knocks, drifts on a slope, or the oil carries metal debris while the motor housing is still sound, a correct M2X210 rotary group is usually enough. Inspect the block, valve plate and pistons first.
How is a JIC M2X210 rotary group different from cheap generic parts?
A JIC rotary group is made to the M2X210 spec, with the block, valve plate and pistons held to the correct material and machining precision, so it seals better and lasts longer than generic parts. As an authorized JIC distributor, Việt Trung Hải guarantees the source and quotes fast.
Get a quote
Request a quote: Swing motor rotary group – Kawasaki M2X210
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · M2XSwing motor rotary group – Kawasaki M2X120M2X120On requestView · get a quote
Kawasaki · M2XSwing motor rotary group – Kawasaki M2X146M2X146On requestView · get a quote
Kawasaki · M2XSwing motor rotary group – Kawasaki M2X150M2X150On requestView · get a quote
Kawasaki · M2XSwing motor rotary group – Kawasaki M2X170M2X170On requestView · get a quote
Kawasaki · M2XSwing motor rotary group – Kawasaki M2X55M2X55On requestView · get a quote
Kawasaki · M2XSwing motor rotary group – Kawasaki M2X96M2X96On requestView · get a quote
Kawasaki · M2XDrive shaft – Kawasaki M2X146M2X146On requestView · get a quote
Kawasaki · M2XDrive shaft – Kawasaki M2X150M2X150On requestView · get a quoteTechnical handbook