Choosing the right partHow to Choose Excavator Bucket Teeth That Last
A field guide to choosing excavator bucket teeth by machine system, ground type, and pinning so they last and do not drop mid-shift.
Topic
Part identification, reading codes, cross-referencing and confirming fitment by model.
Choosing the right partA field guide to choosing excavator bucket teeth by machine system, ground type, and pinning so they last and do not drop mid-shift.
Choosing the right partSeven ways to tell genuine from fake right at the counter: label, stamped code, machining, weight, seal, box code and traceability, plus why fakes always show up in the material.
Choosing the right partHow to pin down the right generation and model of your excavator so you order the correct pump, seals and bearings the first time.
Choosing the right partA field guide to choosing the right excavator bearings and bushings by location, load type and size, so you avoid a wrong buy and a redo.
Choosing the right partA repair technician guide to choosing the right hydraulic hose by mount location, fitting, ply count, and oil type.
Choosing the right partInner diameter, cross-section, compound, Shore hardness, groove size and static-or-dynamic duty — the six factors that must match to choose hydraulic O-rings that will not swell or extrude under pressure.
Choosing the right partA field guide to looking up excavator parts by machine number, serial number, model year and catalog so you order the right code and avoid returns.
Choosing the right partFive specs must match when you replace a hydraulic valve: type, port and thread, actuation and coil voltage, spool, and mounting. Plus how to read the stamped code on the body to order right the first time.
Choosing the right partWhat goes into a cylinder seal kit and how to buy the complete, correctly sized set for each cylinder on your excavator.
Choosing the right partA field guide to choosing a hydraulic filter by the right position, micron rating, and size so your excavator pump and valves last.
Choosing the right partChoose a swing motor by machine generation and assembly code to match gearbox, brake and valves, and avoid buying off-standard.
Choosing the right partA field guide to choosing a pump regulator by pump code and control type so you never mix up the electric and hydraulic versions.
Choosing the right partA field guide to measuring and choosing the right-size hydraulic seal for excavator cylinders, avoiding leaks from wrong diameters or profiles.
Choosing the right partA step-by-step guide to reading the pump code, spline teeth and block style so you pick the right rotary group.
Choosing the right partA field guide to breaking down a hydraulic pump code so you can identify the family, size and variant, then match the rotary group, regulator and seals.
Choosing the right partWhen genuine parts are worth it, when a good replacement will do, and how to judge cost per machine hour.
Choosing the right partA mechanic's guide to spotting genuine from fake NOK seals at the counter by packaging, rubber, spring and price.