Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Front drive shaft – Komatsu HPV55

Komatsu · HPV

Front drive shaft – Komatsu HPV55

New, correct codeOn requestHPV55

Quick answer

The Komatsu HPV55 front drive shaft is the input shaft that takes torque from the engine to turn the HPV55 main pump used on roughly 13-ton Komatsu excavators like the PC120.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the correct part genuine and JIC, ready to run, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Drive shaft
Brand / pump line
Komatsu · HPV
Model code
HPV55
Condition
New, correct code
Availability
On request

What the Komatsu HPV55 front drive shaft fits

The front (input) drive shaft takes torque directly from the engine and passes it into the cylinder block to spin the pump's rotary group. It is the front shaft — unlike the rear shaft, which carries drive through to the second unit in the tandem pump. It fits the Komatsu HPV55 main pump, a piston pump used on roughly 13-ton excavators such as the Komatsu PC120.

Signs it needs replacing

Wear starts at the spline: loose or rounded teeth, knocking or vibration under load, weak output and pressure loss. A scored journal or bent shaft chews the front seal and leaks oil. Replace early to keep metal debris out of the block and valve plate.

Choosing quality parts

Việt Trung Hải is an authorized JIC Hydraulics distributor. The JIC HPV55 front shaft holds the original code, journal and bearing-seat sizes, so the bearing seats square and the seal runs dry. Genuine Komatsu shafts are stocked as well, with a fast quote.

Frequently asked questions

How does the HPV55 front shaft differ from the rear shaft?

The front shaft is the input, taking torque straight from the engine. The rear shaft passes drive to the second unit in the tandem pump. They differ in position and coupling, so order the correct one when replacing.

Which excavator uses the HPV55 pump?

HPV55 is the main pump on roughly 13-ton Komatsu excavators, typically the PC120 family. This front shaft fits that HPV55 pump. Send your machine model and pump number so we confirm the exact part before quoting.

Do you carry JIC parts for the HPV55 shaft?

Yes. Việt Trung Hải is an authorized JIC Hydraulics distributor, so the JIC HPV55 front shaft is JIC's own part: splines and journals machined to size, going into the original housing with no rework. Genuine shafts are available too — contact us for a fast quote.

Get a quote

Request a quote: Front drive shaft – Komatsu HPV55

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides