Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Valve plate – Komatsu HPV55

Komatsu · HPV

Valve plate – Komatsu HPV55

New, correct codeOn requestHPV55

Quick answer

The Komatsu HPV55 valve plate is the high/low-pressure porting plate against the cylinder block, timing each piston's intake and discharge in the HPV main pump used on roughly 13-tonne excavators such as the Komatsu PC120.

Việt Trung Hải supplies genuine Komatsu and JIC plates to code that fit a standard pump, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Valve plate
Brand / pump line
Komatsu · HPV
Model code
HPV55
Condition
New, correct code
Availability
On request

Valve plate for the Komatsu HPV55 pump

The valve plate is the porting plate pressed against the cylinder block, timing each piston's intake and discharge. The HPV55 belongs to Komatsu's HPV main-pump family, fitted to roughly 13-tonne excavators such as the Komatsu PC120. Its sealing face must stay flat and smooth to hold the running clearance under high pressure.

When to replace

A scored or worn valve plate lets oil leak across the mating faces, so pump pressure and flow drop. The machine feels weak and slow under load. Look for groove-like scratches, heat discolouration, or cavitation pitting; unusually hot hydraulic oil signals internal leakage at this pair.

Choosing quality parts

Material, hardness, flatness and surface finish decide service life. Việt Trung Hải supplies genuine Komatsu HPV55 valve plates and JIC plates — the JIC one is machined to the HPV55 code and interchange tolerance, so it seals against the block of a standard pump and makes full pressure. Contact us for a fast quote.

Frequently asked questions

Which pump and machine does the HPV55 valve plate fit?

The HPV55 belongs to Komatsu's HPV main-pump family, used on roughly 13-tonne excavators such as the Komatsu PC120. The valve plate sits inside the pump, pressed against the cylinder block to distribute high- and low-pressure oil to each piston.

How do I know the valve plate is worn?

Common signs are dropping pump pressure with a weak, slow machine under load. On teardown the plate usually shows groove-like scratches, heat discolouration, or cavitation pitting. Unusually hot hydraulic oil also points to internal leakage across the valve plate and block.

Does dirty oil wear the HPV55 plate out faster?

Yes. Metal particles and sludge carried through the sealing gap cut grooves into the face, and the more it scores the more oil bleeds internally. Change filters on schedule and flush the system after any pump repair. Việt Trung Hải keeps HPV55 plates, genuine Komatsu and JIC, to code, with fast quotes.

Get a quote

Request a quote: Valve plate – Komatsu HPV55

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides