
Valve plate – Komatsu KPV90
Quick answer
The Komatsu KPV90 valve plate is the porting plate pressed against the cylinder block, timing each piston's intake and discharge in the Komatsu KPV90 main pump used on hydraulic excavators.
Việt Trung Hải carries genuine and JIC plates, on code and ground flat for a straight fit, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Valve plate
- Brand / pump line
- Komatsu
- Model code
- KPV90
- Condition
- New, correct code
- Availability
- On request
What the Komatsu KPV90 valve plate does
The valve plate is the porting plate pressed against the cylinder block, timing each piston's intake and discharge and separating high- and low-pressure oil. The KPV90 code fits the Komatsu KPV90 axial-piston main pump used on hydraulic excavators. It carries full working pressure while sliding against the block, so its face must stay flat and hard.
Signs it needs replacing
A scored or pitted sealing face, wear rings around the kidney ports, weak pump output, slow or gutless operation under load, fast-heating oil, or metal particles in the fluid. Replace the valve plate together with its cylinder block to restore flow.
Choosing quality
Internal leakage is very sensitive to face flatness and hardness. The JIC Hydraulics KPV90 plate — Việt Trung Hải is an authorized distributor — leaves the factory ground and polished to spec, so it goes into the original pump right, with no hand lapping on the bench. Komatsu genuine plates are in stock too. Contact us for a fast quote.
Frequently asked questions
Which pump does the KPV90 valve plate fit?
The KPV90 code is the valve plate for the Komatsu KPV90 axial-piston main pump used on hydraulic excavators. Send us your pump code or machine model and Việt Trung Hải will confirm the correct part before quoting.
When should the valve plate be replaced?
When the sealing face is scored, pitted or worn around the kidney ports, causing weak pump output, slow operation, fast-heating oil or metal particles in the fluid. Replace it together with the cylinder block to restore flow.
Does the JIC KPV90 plate need lapping or fitting work?
No. The JIC Hydraulics plate Việt Trung Hải distributes is made to the KPV90 code and its interchange tolerances, ground flat at the factory, so it seats straight onto the original block with no lapping or rework.
Get a quote
Request a quote: Valve plate – Komatsu KPV90
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
KomatsuRotary group kit – Komatsu KPV90KPV90On requestView · get a quote
KomatsuRetainer plate – Komatsu KPV90KPV90On requestView · get a quote
KomatsuPiston – Komatsu KPV90KPV90On requestView · get a quote
Komatsu · HPVValve plate – Komatsu HPV132HPV132On requestView · get a quote
Komatsu · HPVValve plate – Komatsu HPV140HPV140On requestView · get a quote
Komatsu · HPVValve plate – Komatsu HPV160HPV160On requestView · get a quote
Komatsu · HPVValve plate – Komatsu HPV35HPV35On requestView · get a quote
Komatsu · HPVValve plate – Komatsu HPV55HPV55On requestView · get a quoteTechnical handbook